Global industrial control system spare parts manufacturer

8002-CC-85 General Electric


  • Marke / Hersteller:

    General Electric
  • Maße:

    14.8 x 10.3 x 3.2 cm
  • Gewicht:

    0.24 kg
  • Land von Herkunft: :

    United States
  • Bezeichnung:

    Drive Snubber Board

Herstellernummer:

8002-CC-85

Hersteller:

 General Electric

Beschreibung:

Erhaltendie besten Angebote fürDS200SSBAG1BAA

Auf Lager, versandbereit

Vollständige Beschreibung:

Die GE DC300 Drive Snubber Board DS200SSBAG1BAA verfügt über einen 2-poligen Stecker, drei Kondensatoren und vier Anschlüsse für Kabel. Die Kondensatoren sind mit MOV1, MOV2 und MOV3 gekennzeichnet. Die Bezeichnungen sind neben den Kondensatoren auf der Platine aufgedruckt.

  [email protected]    + 86 18030235313      dddemi33     2851195473


Wir hoffen auf eine zukünftige, erfolgreiche Zusammenarbeit! Sie werden Ihre verlässlichen Kooperationspartner sein!

Produktmodell: DS200SSBAG1BAA
Ersatzmodell:
Produktparameter:
Produktbeschreibung:
DS200SSBAG1BAA
VOM HERSTELLER EINGESTELLT
Dämpfungsbrett
MARK 5
Turbinensteuerung
MEHRERE EINGÄNGE/AUSGÄNGE
Onboard-RAM
Angehängte Informationen: 14,8 x 10,3 x 3,2 cm
HERSTELLER: General Electric
GEWICHT: 0,24 kg


Produktbeschreibung
Die GE DC300 Antriebs-Snubberplatine DS200SSBAG1BAA verfügt über einen 2-poligen Stecker, drei Kondensatoren und vier Anschlüsse für Kabel. Die Kondensatoren sind mit MOV1, MOV2 und MOV3 gekennzeichnet. Die Bezeichnungen sind auf der Platine neben den Kondensatoren aufgedruckt. Da mehrere Kabel an die Platine angeschlossen sind, die getrennt und anschließend an die Ersatzplatine angeschlossen werden müssen, sind einige Richtlinien zu beachten, um Fehler beim Austausch zu vermeiden, die dazu führen könnten, dass der Servicetechniker die Kabel an die falschen Anschlüsse anschließt.

Bevor Sie die defekte Platine aus dem Laufwerk entfernen, prüfen Sie die an den Anschlüssen befestigten Kabel und notieren Sie sich die zugehörigen IDs. Beschriften Sie ein Etikett oder einen Aufkleber mit der ID des jeweiligen Steckers und bringen Sie diesen am Kabel an. Auf der Platine befindet sich außerdem ein 2-poliger Stecker. Da es jedoch nur einen solchen Stecker gibt, können Sie ihn ohne Etikett oder Aufkleber abziehen.

Achten Sie darauf, einen Winkel zu finden, der Ihnen eine gute Sicht auf das Gehäuse ermöglicht, damit Sie die Platine entfernen können, ohne andere Platinen oder Komponenten im Laufwerk zu beschädigen. Setzen Sie den Schraubendreher vorsichtig an einer der Schrauben an und lösen Sie diese. Es kann hilfreich sein, den Schraubendreher mit einer Hand zur Schraube zu führen. Halten Sie die Schraube beim Herausdrehen mit einer Hand fest und bewahren Sie alle Schrauben und Unterlegscheiben beisammen auf, damit sie beim Einbau der Ersatzplatine griffbereit sind.


Warum sollten Sie sich für uns entscheiden?
Integrität, Zuverlässigkeit und Ehrlichkeit sind die wichtigsten Grundsätze unseres Unternehmens. Wir setzen alles daran, Ihnen den besten Service und die besten Produkte zu bieten – von SPS-Steuerungen bis zu Servomotoren, von Sensoren bis zu Relais, von Schaltern bis zu Pumpen und Ventilen. Ihre Entscheidung für uns ist uns sehr wichtig, und wir wissen sie zu schätzen. Wir sind stets Ihr verlässlicher Partner und unterstützen Sie auf Ihrem Weg zum Erfolg.


Verkaufsschlager 

APBU-44C 64669982F

900G02-0102

IC693CPU360

TU811V1 3BSE013231R1

51304437-150

IS230SRTDH2A

3BHE023784R2530

51405045-175

531X307LTBAKG1

DSQC503

TC-IXL061

IC693CPU352

PFSK101 YM322001-ED

10004/H/F

531X139APMASG2 531X139APMARM7

AI845-eA 3BSE023675R2

MU-TD0D12

T35 T35E00HCHF8HH6CM6DP67UXXWXX

DTPC723A 3EST000210-3450

51304848-100

IS210BPPCH1AD

DSDX454 5716075-AT

MC-TAIH22

IC693MDL741C

PM861AK02 3BSE018160R1

900C32-0141-00

IC693ACC310

SMU-03 3HNA013638-001

51197564-200

IS200VVIBH1CAB IS200VVIBH1C

07ZE63R302

8C-PAIH54

IC200CMM020-FA

BRC300 PHCBRC30000000

10201/2/1 11502

IC200MDL640

NTCL01-A

8U-TAIMA1

DS200PCCAG5ACB

C1900/0363 C1900/0363/0360A

CC-KFSGR5

DS3810MMBB1A1A

PFBO161 3BSE000460R1

10014/I/I

IC200CHS002

DLM02

8U-TDILB1

IC693ALG220

3HAC021905-001/05

8C-TDODA1

IC693CMM321

PP826 3BSE042244R1

620-0036

IC697ALG440

DSQC236G

MC-GAIH22

IC697BEM731P

RS01 RS 01

CC-PUI001 51454205-175

IC697MDL740

UFC719AE101 3BHB003041R0101

CC-TDIL01

F650BFBF1G0HIC

Bild-/Videoanfrage


Der Kauf von Ausrüstung muss nicht immer ein Glücksspiel sein. Wir wissen, dass es beim Kauf von Ausrüstung an Bord viele Unterschiede gibt und die Auswahl zwischen verschiedenen Artikeln oft schwierig ist, insbesondere wenn die Ausrüstung nicht direkt vor einem steht.

Was wäre, wenn Sie ein Gerät vor dem Kauf begutachten könnten? Nicht nur ein Bild von der Website des Herstellers, sondern das tatsächliche Gerät, das Sie erhalten würden.

Mit Video bringen wir Sie der Besichtigung der Geräte, an denen Sie interessiert sind, einen Schritt näher, ohne dass Sie darauf warten müssen, dass die Geräte bei Ihnen vor der Tür eintreffen.

Fordern Sie ein Video an, um das Gerät, an dem Sie interessiert sind, vor dem Kauf genau zu sehen. Sie können sich die Etiketten mit der Seriennummer oder den allgemeinen Zustand des Geräts aus der Nähe ansehen.

Es ist, als ob der Laden zu Ihnen käme!


Anfrage für Video/Bild

Welche Kunden sagen sagen?
Anastasia

Sie sind sehr professionell!
Bernard

Die Produktqualität ist sehr gut. Wir sind an einer langfristigen Zusammenarbeit interessiert!
  • 93 %
    Pünktliche Lieferungen
  • 50.000
    Lagerfläche (Quadratfuß)
  • 138
    Bediente Länder
  • 20+
    Jahre im Geschäft
Verwandte Produkte
IC630MDL380 GE Fanuc 16-Point Relay Output Module
IC630MDL380 | GE Fanuc 16-Point Relay Output Module
In stock ‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌ OFFICIAL PRODUCT · GE FANUC IC630MDL380 is a GE Fanuc Series Three 16-Point Relay Output Module. The manufacturer table lists 5 to 265 V AC/DC maximum switching voltage, 4 A continuous current and 5 ms operating delays. Preserve group supplies and load type, then check contact protection and switching duty before service. STOCKAvailable WARRANTY1 Year Warranty DISPATCH2 days ORIGINUSA Configuration note: Model-identification graphic is not a product photograph. Request current supplied-unit photos and a readable IC630MDL380 nameplate before ordering. REQUEST A QUOTECHECK AVAILABILITY OFFICIAL SOURCE BASIS: GE Series Three Manual GEK-25376 body:has(#hero-IC630MDL380) .prom-right>.pro-table{display:none!important;border-top:0!important;margin-top:0!important;padding-top:0!important}body:has(#hero-IC630MDL380) .slider.autoplay4 .text{display:none!important}body:has(#hero-IC630MDL380) .prom-right>h1{font-family:Arial,'Segoe UI',Helvetica,sans-serif;color:#092f50;font-size:33px;line-height:1.14;font-weight:700;letter-spacing:-.55px;margin-bottom:15px}@media(min-width:768px){body:has(#hero-IC630MDL380) .page-right{display:grid!important;grid-template-columns:minmax(0,1fr) minmax(0,1fr);align-items:stretch}body:has(#hero-IC630MDL380) .page-right>.prom_img{grid-column:1;grid-row:1;float:none!important;width:auto!important;max-width:none!important;display:flex!important;flex-direction:column!important;box-sizing:border-box}body:has(#hero-IC630MDL380) .page-right>.prom-right{grid-column:2;grid-row:1;float:none!important;width:auto!important;max-width:none!important;box-sizing:border-box;margin-bottom:0!important}body:has(#hero-IC630MDL380) .prom_img:after{content:"OFFICIAL CONFIGURATION · IC630MDL380 · 16-POINT RELAY OUTPUT MODULE";display:block;margin-top:auto;margin-bottom:40px;padding:15px 17px;border-radius:6px;background:linear-gradient(135deg,#0a3658,#0b6e91);color:#fff;font-family:Arial,'Segoe UI',Helvetica,sans-serif;font-size:11px;line-height:1.65;font-weight:700;letter-spacing:.035em;text-align:center;box-shadow:0 8px 22px rgba(9,47,80,.14)}body:has(#hero-IC630MDL380) .page-right>:nth-child(3),body:has(#hero-IC630MDL380) .page-right>:nth-child(n+4...
Anfrage jetzt
IC630MDL376 GE Fanuc 8-Point Isolated AC Output Module
IC630MDL376 | GE Fanuc 8-Point Isolated AC Output Module
In stock ‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌ OFFICIAL PRODUCT · GE FANUC IC630MDL376 is a GE Fanuc Series Three 8-Point Isolated AC Output Module. The manual specifies 97 to 265 V AC operation, up to 2 A per circuit and individual 3 A fuses. Preserve each source/load pair, verify inrush and derating, then test all outputs under controlled conditions. STOCKAvailable WARRANTY1 Year Warranty DISPATCH2 days ORIGINUSA Configuration note: Model-identification graphic is not a product photograph. Request current supplied-unit photos and a readable IC630MDL376 nameplate before ordering. REQUEST A QUOTECHECK AVAILABILITY OFFICIAL SOURCE BASIS: GE Series Three Manual GEK-25376 body:has(#hero-IC630MDL376) .prom-right>.pro-table{display:none!important;border-top:0!important;margin-top:0!important;padding-top:0!important}body:has(#hero-IC630MDL376) .slider.autoplay4 .text{display:none!important}body:has(#hero-IC630MDL376) .prom-right>h1{font-family:Arial,'Segoe UI',Helvetica,sans-serif;color:#092f50;font-size:33px;line-height:1.14;font-weight:700;letter-spacing:-.55px;margin-bottom:15px}@media(min-width:768px){body:has(#hero-IC630MDL376) .page-right{display:grid!important;grid-template-columns:minmax(0,1fr) minmax(0,1fr);align-items:stretch}body:has(#hero-IC630MDL376) .page-right>.prom_img{grid-column:1;grid-row:1;float:none!important;width:auto!important;max-width:none!important;display:flex!important;flex-direction:column!important;box-sizing:border-box}body:has(#hero-IC630MDL376) .page-right>.prom-right{grid-column:2;grid-row:1;float:none!important;width:auto!important;max-width:none!important;box-sizing:border-box;margin-bottom:0!important}body:has(#hero-IC630MDL376) .prom_img:after{content:"OFFICIAL CONFIGURATION · IC630MDL376 · 8-POINT ISOLATED AC OUTPUT MODULE";display:block;margin-top:auto;margin-bottom:40px;padding:15px 17px;border-radius:6px;background:linear-gradient(135deg,#0a3658,#0b6e91);color:#fff;font-family:Arial,'Segoe UI',Helvetica,sans-serif;font-size:11px;line-height:1.65;font-weight:700;letter-spacing:.035em;text-align:center;box-shadow:0 8px 22px rgba(9,47,80,.14)}body:has(#hero-IC630MDL376) .page-right>:nth-child(3),body:has(#hero-IC630MDL376) .page-right>:nth-child(n+4){grid-colu...
Anfrage jetzt
IC630MDL375 GE Fanuc 16-Point 115/230 V AC Output Module
IC630MDL375 | GE Fanuc 16-Point 115/230 V AC Output Module
In stock ‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌ OFFICIAL PRODUCT · GE FANUC IC630MDL375 is a GE Fanuc Series Three 16-Point 115/230 V AC Output Module. Two groups of eight outputs each have a separate common and 5 A fuse. Record load current, inrush and group supply wiring, then apply the derating chart and verify every controlled load. STOCKAvailable WARRANTY1 Year Warranty DISPATCH2 days ORIGINUSA Configuration note: Model-identification graphic is not a product photograph. Request current supplied-unit photos and a readable IC630MDL375 nameplate before ordering. REQUEST A QUOTECHECK AVAILABILITY OFFICIAL SOURCE BASIS: GE Series Three Manual GEK-25376 body:has(#hero-IC630MDL375) .prom-right>.pro-table{display:none!important;border-top:0!important;margin-top:0!important;padding-top:0!important}body:has(#hero-IC630MDL375) .slider.autoplay4 .text{display:none!important}body:has(#hero-IC630MDL375) .prom-right>h1{font-family:Arial,'Segoe UI',Helvetica,sans-serif;color:#092f50;font-size:33px;line-height:1.14;font-weight:700;letter-spacing:-.55px;margin-bottom:15px}@media(min-width:768px){body:has(#hero-IC630MDL375) .page-right{display:grid!important;grid-template-columns:minmax(0,1fr) minmax(0,1fr);align-items:stretch}body:has(#hero-IC630MDL375) .page-right>.prom_img{grid-column:1;grid-row:1;float:none!important;width:auto!important;max-width:none!important;display:flex!important;flex-direction:column!important;box-sizing:border-box}body:has(#hero-IC630MDL375) .page-right>.prom-right{grid-column:2;grid-row:1;float:none!important;width:auto!important;max-width:none!important;box-sizing:border-box;margin-bottom:0!important}body:has(#hero-IC630MDL375) .prom_img:after{content:"OFFICIAL CONFIGURATION · IC630MDL375 · 16-POINT 115/230 V AC OUTPUT MODULE";display:block;margin-top:auto;margin-bottom:40px;padding:15px 17px;border-radius:6px;background:linear-gradient(135deg,#0a3658,#0b6e91);color:#fff;font-family:Arial,'Segoe UI',Helvetica,sans-serif;font-size:11px;line-height:1.65;font-weight:700;letter-spacing:.035em;text-align:center;box-shadow:0 8px 22px rgba(9,47,80,.14)}body:has(#hero-IC630MDL375) .page-right>:nth-child(3),body:has(#hero-IC630MDL375) .page-right>:nth-child(n+4){grid-column:1/-1;float:n...
Anfrage jetzt
IC630MDL368 GE Fanuc 2-Channel Unipolar Analog Output Module
IC630MDL368 | GE Fanuc 2-Channel Unipolar Analog Output Module
In stock ‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌ OFFICIAL PRODUCT · GE FANUC IC630MDL368 is the two-channel unipolar analog-voltage output module listed in the GE ordering guide, with a documented 0 to 10 V DC signal range. Match the receiving instrument and application scaling to this exact range. Preserve both channel assignments, then measure commanded values before restoring the process connection. STOCKAvailable WARRANTY1 Year Warranty DISPATCH2 days ORIGINUSA Configuration note: Model-identification graphic is not a product photograph. Request current supplied-unit photos and a readable IC630MDL368 nameplate before ordering. REQUEST A QUOTECHECK AVAILABILITY OFFICIAL SOURCE BASIS: GE Fanuc Product and Publications Ordering Guide GEP-791C body:has(#hero-IC630MDL368) .prom-right>.pro-table{display:none!important;border-top:0!important;margin-top:0!important;padding-top:0!important}body:has(#hero-IC630MDL368) .slider.autoplay4 .text{display:none!important}body:has(#hero-IC630MDL368) .prom-right>h1{font-family:Arial,'Segoe UI',Helvetica,sans-serif;color:#092f50;font-size:33px;line-height:1.14;font-weight:700;letter-spacing:-.55px;margin-bottom:15px}@media(min-width:768px){body:has(#hero-IC630MDL368) .page-right{display:grid!important;grid-template-columns:minmax(0,1fr) minmax(0,1fr);align-items:stretch}body:has(#hero-IC630MDL368) .page-right>.prom_img{grid-column:1;grid-row:1;float:none!important;width:auto!important;max-width:none!important;display:flex!important;flex-direction:column!important;box-sizing:border-box}body:has(#hero-IC630MDL368) .page-right>.prom-right{grid-column:2;grid-row:1;float:none!important;width:auto!important;max-width:none!important;box-sizing:border-box;margin-bottom:0!important}body:has(#hero-IC630MDL368) .prom_img:after{content:"OFFICIAL CONFIGURATION · IC630MDL368 · 2-CHANNEL UNIPOLAR ANALOG OUTPUT MODULE";display:block;margin-top:auto;margin-bottom:40px;padding:15px 17px;border-radius:6px;background:linear-gradient(135deg,#0a3658,#0b6e91);color:#fff;font-family:Arial,'Segoe UI',Helvetica,sans-serif;font-size:11px;line-height:1.65;font-weight:700;letter-spacing:.035em;text-align:center;box-shadow:0 8px 22px rgba(9,47,80,.14)}body:has(#hero-IC630MDL368) .page-right...
Anfrage jetzt
IC630MDL367 GE Fanuc 2-Channel Bipolar Analog Output Module
IC630MDL367 | GE Fanuc 2-Channel Bipolar Analog Output Module
In stock ‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌ OFFICIAL PRODUCT · GE FANUC IC630MDL367 is the two-channel bipolar analog-voltage output module listed in the GE ordering guide, with a documented +/-10 V DC signal range. Match the receiving instrument and application scaling to this exact range. Preserve both channel assignments, then measure commanded values before restoring the process connection. STOCKAvailable WARRANTY1 Year Warranty DISPATCH2 days ORIGINUSA Configuration note: Model-identification graphic is not a product photograph. Request current supplied-unit photos and a readable IC630MDL367 nameplate before ordering. REQUEST A QUOTECHECK AVAILABILITY OFFICIAL SOURCE BASIS: GE Fanuc Product and Publications Ordering Guide GEP-791C body:has(#hero-IC630MDL367) .prom-right>.pro-table{display:none!important;border-top:0!important;margin-top:0!important;padding-top:0!important}body:has(#hero-IC630MDL367) .slider.autoplay4 .text{display:none!important}body:has(#hero-IC630MDL367) .prom-right>h1{font-family:Arial,'Segoe UI',Helvetica,sans-serif;color:#092f50;font-size:33px;line-height:1.14;font-weight:700;letter-spacing:-.55px;margin-bottom:15px}@media(min-width:768px){body:has(#hero-IC630MDL367) .page-right{display:grid!important;grid-template-columns:minmax(0,1fr) minmax(0,1fr);align-items:stretch}body:has(#hero-IC630MDL367) .page-right>.prom_img{grid-column:1;grid-row:1;float:none!important;width:auto!important;max-width:none!important;display:flex!important;flex-direction:column!important;box-sizing:border-box}body:has(#hero-IC630MDL367) .page-right>.prom-right{grid-column:2;grid-row:1;float:none!important;width:auto!important;max-width:none!important;box-sizing:border-box;margin-bottom:0!important}body:has(#hero-IC630MDL367) .prom_img:after{content:"OFFICIAL CONFIGURATION · IC630MDL367 · 2-CHANNEL BIPOLAR ANALOG OUTPUT MODULE";display:block;margin-top:auto;margin-bottom:40px;padding:15px 17px;border-radius:6px;background:linear-gradient(135deg,#0a3658,#0b6e91);color:#fff;font-family:Arial,'Segoe UI',Helvetica,sans-serif;font-size:11px;line-height:1.65;font-weight:700;letter-spacing:.035em;text-align:center;box-shadow:0 8px 22px rgba(9,47,80,.14)}body:has(#hero-IC630MDL367) .page-right>:nt...
Anfrage jetzt
IC630MDL366 GE Fanuc 2-Channel Analog Output Module
IC630MDL366 | GE Fanuc 2-Channel Analog Output Module
In stock ‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌ OFFICIAL PRODUCT · GE FANUC IC630MDL366 is a GE Fanuc Series Three 2-Channel Analog Output Module. The manufacturer bulletin documents 1 to 5 V and 4 to 20 mA outputs, with a 400-ohm maximum current-mode load. Preserve channel scaling and loop wiring, then validate both outputs against calibrated receiving equipment. STOCKAvailable WARRANTY1 Year Warranty DISPATCH2 days ORIGINUSA Configuration note: Model-identification graphic is not a product photograph. Request current supplied-unit photos and a readable IC630MDL366 nameplate before ordering. REQUEST A QUOTECHECK AVAILABILITY OFFICIAL SOURCE BASIS: GE Series Three Supplement GEK-90819, Bulletin 4A-008 body:has(#hero-IC630MDL366) .prom-right>.pro-table{display:none!important;border-top:0!important;margin-top:0!important;padding-top:0!important}body:has(#hero-IC630MDL366) .slider.autoplay4 .text{display:none!important}body:has(#hero-IC630MDL366) .prom-right>h1{font-family:Arial,'Segoe UI',Helvetica,sans-serif;color:#092f50;font-size:33px;line-height:1.14;font-weight:700;letter-spacing:-.55px;margin-bottom:15px}@media(min-width:768px){body:has(#hero-IC630MDL366) .page-right{display:grid!important;grid-template-columns:minmax(0,1fr) minmax(0,1fr);align-items:stretch}body:has(#hero-IC630MDL366) .page-right>.prom_img{grid-column:1;grid-row:1;float:none!important;width:auto!important;max-width:none!important;display:flex!important;flex-direction:column!important;box-sizing:border-box}body:has(#hero-IC630MDL366) .page-right>.prom-right{grid-column:2;grid-row:1;float:none!important;width:auto!important;max-width:none!important;box-sizing:border-box;margin-bottom:0!important}body:has(#hero-IC630MDL366) .prom_img:after{content:"OFFICIAL CONFIGURATION · IC630MDL366 · 2-CHANNEL ANALOG OUTPUT MODULE";display:block;margin-top:auto;margin-bottom:40px;padding:15px 17px;border-radius:6px;background:linear-gradient(135deg,#0a3658,#0b6e91);color:#fff;font-family:Arial,'Segoe UI',Helvetica,sans-serif;font-size:11px;line-height:1.65;font-weight:700;letter-spacing:.035em;text-align:center;box-shadow:0 8px 22px rgba(9,47,80,.14)}body:has(#hero-IC630MDL366) .page-right>:nth-child(3),body:has(#hero-IC630MDL366) .page-ri...
Anfrage jetzt
IC630MDL357 GE Fanuc 16-Point 24 V DC Source Output Module
IC630MDL357 | GE Fanuc 16-Point 24 V DC Source Output Module
In stock ‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌ OFFICIAL PRODUCT · GE FANUC IC630MDL357 is the sixteen-point 24 V DC source-output module listed for the GE Series Three platform. The sourcing direction must match the installed load return and cannot be inferred from a nearby sinking-output catalog number. Record wiring and load requirements, then verify each controlled circuit before service. STOCKAvailable WARRANTY1 Year Warranty DISPATCH2 days ORIGINUSA Configuration note: Model-identification graphic is not a product photograph. Request current supplied-unit photos and a readable IC630MDL357 nameplate before ordering. REQUEST A QUOTECHECK AVAILABILITY OFFICIAL SOURCE BASIS: GE Fanuc Product and Publications Ordering Guide GEP-791C body:has(#hero-IC630MDL357) .prom-right>.pro-table{display:none!important;border-top:0!important;margin-top:0!important;padding-top:0!important}body:has(#hero-IC630MDL357) .slider.autoplay4 .text{display:none!important}body:has(#hero-IC630MDL357) .prom-right>h1{font-family:Arial,'Segoe UI',Helvetica,sans-serif;color:#092f50;font-size:33px;line-height:1.14;font-weight:700;letter-spacing:-.55px;margin-bottom:15px}@media(min-width:768px){body:has(#hero-IC630MDL357) .page-right{display:grid!important;grid-template-columns:minmax(0,1fr) minmax(0,1fr);align-items:stretch}body:has(#hero-IC630MDL357) .page-right>.prom_img{grid-column:1;grid-row:1;float:none!important;width:auto!important;max-width:none!important;display:flex!important;flex-direction:column!important;box-sizing:border-box}body:has(#hero-IC630MDL357) .page-right>.prom-right{grid-column:2;grid-row:1;float:none!important;width:auto!important;max-width:none!important;box-sizing:border-box;margin-bottom:0!important}body:has(#hero-IC630MDL357) .prom_img:after{content:"OFFICIAL CONFIGURATION · IC630MDL357 · 16-POINT 24 V DC SOURCE OUTPUT MODULE";display:block;margin-top:auto;margin-bottom:40px;padding:15px 17px;border-radius:6px;background:linear-gradient(135deg,#0a3658,#0b6e91);color:#fff;font-family:Arial,'Segoe UI',Helvetica,sans-serif;font-size:11px;line-height:1.65;font-weight:700;letter-spacing:.035em;text-align:center;box-shadow:0 8px 22px rgba(9,47,80,.14)}body:has(#hero-IC630MDL357) .page-right>:nth-child...
Anfrage jetzt
IC630MDL356 GE Fanuc 32-Point 24 V DC Sink Output Module
IC630MDL356 | GE Fanuc 32-Point 24 V DC Sink Output Module
In stock ‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌ OFFICIAL PRODUCT · GE FANUC IC630MDL356 is identified in the GE ordering guide as a thirty-two-point 24 V DC sink-output module with a D connector and LED indication. Its field interface must be checked independently from terminal-wired variants. Preserve the connector pin map and load references, then verify polarity and each commanded output. STOCKAvailable WARRANTY1 Year Warranty DISPATCH2 days ORIGINUSA Configuration note: Model-identification graphic is not a product photograph. Request current supplied-unit photos and a readable IC630MDL356 nameplate before ordering. REQUEST A QUOTECHECK AVAILABILITY OFFICIAL SOURCE BASIS: GE Fanuc Product and Publications Ordering Guide GEP-791C body:has(#hero-IC630MDL356) .prom-right>.pro-table{display:none!important;border-top:0!important;margin-top:0!important;padding-top:0!important}body:has(#hero-IC630MDL356) .slider.autoplay4 .text{display:none!important}body:has(#hero-IC630MDL356) .prom-right>h1{font-family:Arial,'Segoe UI',Helvetica,sans-serif;color:#092f50;font-size:33px;line-height:1.14;font-weight:700;letter-spacing:-.55px;margin-bottom:15px}@media(min-width:768px){body:has(#hero-IC630MDL356) .page-right{display:grid!important;grid-template-columns:minmax(0,1fr) minmax(0,1fr);align-items:stretch}body:has(#hero-IC630MDL356) .page-right>.prom_img{grid-column:1;grid-row:1;float:none!important;width:auto!important;max-width:none!important;display:flex!important;flex-direction:column!important;box-sizing:border-box}body:has(#hero-IC630MDL356) .page-right>.prom-right{grid-column:2;grid-row:1;float:none!important;width:auto!important;max-width:none!important;box-sizing:border-box;margin-bottom:0!important}body:has(#hero-IC630MDL356) .prom_img:after{content:"OFFICIAL CONFIGURATION · IC630MDL356 · 32-POINT 24 V DC SINK OUTPUT MODULE";display:block;margin-top:auto;margin-bottom:40px;padding:15px 17px;border-radius:6px;background:linear-gradient(135deg,#0a3658,#0b6e91);color:#fff;font-family:Arial,'Segoe UI',Helvetica,sans-serif;font-size:11px;line-height:1.65;font-weight:700;letter-spacing:.035em;text-align:center;box-shadow:0 8px 22px rgba(9,47,80,.14)}body:has(#hero-IC630MDL356) .page-right>:nth-child(3)...
Anfrage jetzt
Lass uns zusammenarbeiten
stecken in einer kritischen Situation? moore automation bietet seinen Kunden weltweit eine Vielzahl von Dienstleistungen an. Kontaktieren Sie uns noch heute, um herauszufinden, wie Unser erfahrenes Team kann Ihnen helfen, Ausfallzeiten zu minimieren.
kontaktiere uns

Heim

Produkte

whatsapp