Global industrial control system spare parts manufacturer

General Electric IC693ALG392C Ausgangsmodul

  • Marke / Hersteller:

    General Electric
  • Maße:

    6.3cm*5.2cm*7cm
  • Gewicht:

    0.99kg
  • Land von Herkunft: :

    USA
  • Bezeichnung:

    Output Module

Herstellernummer:

IC693ALG392C

Hersteller:

General Electric

Beschreibung:

IC693ALG392 ist ein analoges Strom-/Spannungsausgangsmodul für die PACSystems RX3i und Serie 90-30.

Vollständige Beschreibung:

Ausgangsspannungsbereich: 0 bis +10 V (unipolar) oder -10 bis +10 V (bipolar)
Aktueller Ausgangsbereich: 0 bis 20 mA oder 4 bis 20 mA

Status:

  Auf Lager und versandbereit


 Verkaufsleiterin: Tiffany Guan  [email protected]   + 86 18030235313       dddemi33        2851195473

  • Anzahl der Kanäle: 8
  • Ausgangsspannungsbereich: 0 bis +10 V (unipolar) oder -10 bis +10 V (bipolar)
  • Aktueller Ausgangsbereich: 0 bis 20 mA oder 4 bis 20 mA
  • Aktualisierungsrate: 8 ms (alle Kanäle)
  • Maximale Ausgangslast: 5 mA
  • Stromverbrauch: 110 mA vom +5-V-Bus oder 315 mA von der +24-V-Benutzerversorgung
Das IC693ALG392 ist ein analoges Strom-/Spannungsausgangsmodul für die PACSystems RX3i und Serie 90-30. Das Modul verfügt über acht unsymmetrische Ausgangskanäle mit Spannungs- und/oder Stromschleifenausgängen, je nach Konfiguration durch den Benutzer. Jeder Kanal kann über die Konfigurationssoftware für die Oszilloskope (0 bis +10 Volt) unipolar, (-10 bis +10 Volt) bipolar oder mit Strömen von 0 bis 20 Milliampere bzw. 4 bis 20 Milliampere konfiguriert werden. Jeder Kanal kann 15 bis 16 Bit verarbeiten, abhängig vom vom Benutzer gewählten Messbereich. Alle acht Kanäle werden alle 8 Millisekunden aktualisiert.

Das Modul IC693ALG392 meldet im Strommodus für jeden Kanal einen Leitungsunterbrechungsfehler an die CPU. Bei einer Unterbrechung der Systemstromversorgung kann das Modul in einen definierten letzten Zustand zurückkehren. Wird das Modul dauerhaft mit externer Spannung versorgt, behält jeder Ausgang seinen letzten Wert bei oder wird gemäß Konfiguration auf Null zurückgesetzt. Die Installation ist in jedem I/O-Steckplatz eines RX3i- oder Series 90-30-Systems möglich.

Dieses Modul benötigt eine 24-V-Gleichstromversorgung von einer externen Quelle, die direkt an die Klemmenleiste angeschlossen ist. Jeder Ausgangskanal ist unsymmetrisch und werkseitig auf 0,625 μA eingestellt. Dieser Wert kann sich spannungsabhängig ändern. Bei starken HF-Störungen kann die Genauigkeit des Moduls auf ±1 % FS für Stromausgänge und ±3 % FS für Spannungsausgänge reduziert sein. Für den ordnungsgemäßen Betrieb muss das Modul in einem Metallgehäuse montiert werden.

AAI143-H00/K4A00

330104-00-20-05-02-00

6ES7400-1TA01-0AA0

Triconex 9760-210

F9900RR

3300/03-01-00

6ES7350-2AH00-0AE0

Triconex 7400027-100

AST143

3500/60 133835-01

C98043-A1682-L1

Triconex 7400165-510

ANR10D

3300/16-15-01-03-00-00-00

C79-458-L7000-B315

Triconex 2755-020

AMM32J S1

330709-000-050-10-02-00

6DR2100-5

Triconex 3704E

AIP571 S1

128275-01

6AA6504-0AA

Triconex 4000029-010

APM11

3500/42 135489-02

6ES7492-1AL00-0AA0

Triconex 3481

AIP827-1

3300/20

6DD1600-0AJ0

Triconex 8311

ADM52C

3500/42-06-RU

6ES7132-4BD02-0AA0

Triconex 2553 7400056-310

SEA4D-01

330130-040-01-05

6ES7315-1AF03-0AB0

Triconex 3351

AIP171 S2

3500/50 133450-01

6EP8106-0AC20

Triconex 4000093-320

AMM22C

3500/91-01-02-00

6ES7331-1KF02-0AB0

Triconex 4000103-520

AAP135-S00/K4A00

88149-01

6GK1543-1AA01

Triconex 3636R

F9342L-02

125768-01

39VIMCBN

Triconex 3510

D0114RB

125800-02

6ES7431-7KF10-0AB0

Triconex 7400028-100

AAP149-S00

330930-040-02-00

6ES7321-1BL00-0AA0

Triconex 4000042-125

AFS20D/AFG20D

3300/46-46-04-02-01

A5E00103265

Triconex 3805EN

ACM21RS-232

18745-04

39PSR4ANDN 16114-200/01

Triconex 4000043-332

ARM55T

126648-02

6ES7222-1HF22-0XA8

Triconex 4000042-320

AMM32T

3500/60 133827-01

6ES5948-3UA11

Triconex 2661

Bild-/Videoanfrage


Der Kauf von Ausrüstung muss nicht immer ein Glücksspiel sein. Wir wissen, dass es beim Kauf von Ausrüstung an Bord viele Unterschiede gibt und die Auswahl zwischen verschiedenen Produkten oft schwierig ist, insbesondere wenn die Ausrüstung nicht direkt vor einem steht.

Was wäre, wenn Sie ein Gerät vor dem Kauf begutachten könnten? Nicht nur ein Bild von der Website des Herstellers, sondern das tatsächliche Gerät, das Sie erhalten würden.

Mit Video bringen wir Sie der Besichtigung der Geräte, an denen Sie interessiert sind, einen Schritt näher, ohne dass Sie darauf warten müssen, dass die Geräte bei Ihnen vor der Tür eintreffen.

Fordern Sie ein Video an, um das Gerät, an dem Sie interessiert sind, vor dem Kauf genau zu sehen. Sie können sich die Etiketten mit der Seriennummer oder den allgemeinen Zustand des Geräts aus der Nähe ansehen.

Es ist, als ob der Laden zu Ihnen käme!


Anfrage für Video/Bild

Welche Kunden sagen sagen?
Eriksson.

Die Qualität der von Moore gelieferten Waren ist garantiert!
Nathaniel

Die Qualität der Produkte ist sehr gut, und wir werden bei Bedarf wiederkommen.
  • 93 %
    Pünktliche Lieferungen
  • 50.000
    Lagerfläche (Quadratfuß)
  • 138
    Bediente Länder
  • 20+
    Jahre im Geschäft
Verwandte Produkte
IC630MDL380 GE Fanuc 16-Point Relay Output Module
IC630MDL380 | GE Fanuc 16-Point Relay Output Module
In stock ‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌ OFFICIAL PRODUCT · GE FANUC IC630MDL380 is a GE Fanuc Series Three 16-Point Relay Output Module. The manufacturer table lists 5 to 265 V AC/DC maximum switching voltage, 4 A continuous current and 5 ms operating delays. Preserve group supplies and load type, then check contact protection and switching duty before service. STOCKAvailable WARRANTY1 Year Warranty DISPATCH2 days ORIGINUSA Configuration note: Model-identification graphic is not a product photograph. Request current supplied-unit photos and a readable IC630MDL380 nameplate before ordering. REQUEST A QUOTECHECK AVAILABILITY OFFICIAL SOURCE BASIS: GE Series Three Manual GEK-25376 body:has(#hero-IC630MDL380) .prom-right>.pro-table{display:none!important;border-top:0!important;margin-top:0!important;padding-top:0!important}body:has(#hero-IC630MDL380) .slider.autoplay4 .text{display:none!important}body:has(#hero-IC630MDL380) .prom-right>h1{font-family:Arial,'Segoe UI',Helvetica,sans-serif;color:#092f50;font-size:33px;line-height:1.14;font-weight:700;letter-spacing:-.55px;margin-bottom:15px}@media(min-width:768px){body:has(#hero-IC630MDL380) .page-right{display:grid!important;grid-template-columns:minmax(0,1fr) minmax(0,1fr);align-items:stretch}body:has(#hero-IC630MDL380) .page-right>.prom_img{grid-column:1;grid-row:1;float:none!important;width:auto!important;max-width:none!important;display:flex!important;flex-direction:column!important;box-sizing:border-box}body:has(#hero-IC630MDL380) .page-right>.prom-right{grid-column:2;grid-row:1;float:none!important;width:auto!important;max-width:none!important;box-sizing:border-box;margin-bottom:0!important}body:has(#hero-IC630MDL380) .prom_img:after{content:"OFFICIAL CONFIGURATION · IC630MDL380 · 16-POINT RELAY OUTPUT MODULE";display:block;margin-top:auto;margin-bottom:40px;padding:15px 17px;border-radius:6px;background:linear-gradient(135deg,#0a3658,#0b6e91);color:#fff;font-family:Arial,'Segoe UI',Helvetica,sans-serif;font-size:11px;line-height:1.65;font-weight:700;letter-spacing:.035em;text-align:center;box-shadow:0 8px 22px rgba(9,47,80,.14)}body:has(#hero-IC630MDL380) .page-right>:nth-child(3),body:has(#hero-IC630MDL380) .page-right>:nth-child(n+4...
Anfrage jetzt
IC630MDL376 GE Fanuc 8-Point Isolated AC Output Module
IC630MDL376 | GE Fanuc 8-Point Isolated AC Output Module
In stock ‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌ OFFICIAL PRODUCT · GE FANUC IC630MDL376 is a GE Fanuc Series Three 8-Point Isolated AC Output Module. The manual specifies 97 to 265 V AC operation, up to 2 A per circuit and individual 3 A fuses. Preserve each source/load pair, verify inrush and derating, then test all outputs under controlled conditions. STOCKAvailable WARRANTY1 Year Warranty DISPATCH2 days ORIGINUSA Configuration note: Model-identification graphic is not a product photograph. Request current supplied-unit photos and a readable IC630MDL376 nameplate before ordering. REQUEST A QUOTECHECK AVAILABILITY OFFICIAL SOURCE BASIS: GE Series Three Manual GEK-25376 body:has(#hero-IC630MDL376) .prom-right>.pro-table{display:none!important;border-top:0!important;margin-top:0!important;padding-top:0!important}body:has(#hero-IC630MDL376) .slider.autoplay4 .text{display:none!important}body:has(#hero-IC630MDL376) .prom-right>h1{font-family:Arial,'Segoe UI',Helvetica,sans-serif;color:#092f50;font-size:33px;line-height:1.14;font-weight:700;letter-spacing:-.55px;margin-bottom:15px}@media(min-width:768px){body:has(#hero-IC630MDL376) .page-right{display:grid!important;grid-template-columns:minmax(0,1fr) minmax(0,1fr);align-items:stretch}body:has(#hero-IC630MDL376) .page-right>.prom_img{grid-column:1;grid-row:1;float:none!important;width:auto!important;max-width:none!important;display:flex!important;flex-direction:column!important;box-sizing:border-box}body:has(#hero-IC630MDL376) .page-right>.prom-right{grid-column:2;grid-row:1;float:none!important;width:auto!important;max-width:none!important;box-sizing:border-box;margin-bottom:0!important}body:has(#hero-IC630MDL376) .prom_img:after{content:"OFFICIAL CONFIGURATION · IC630MDL376 · 8-POINT ISOLATED AC OUTPUT MODULE";display:block;margin-top:auto;margin-bottom:40px;padding:15px 17px;border-radius:6px;background:linear-gradient(135deg,#0a3658,#0b6e91);color:#fff;font-family:Arial,'Segoe UI',Helvetica,sans-serif;font-size:11px;line-height:1.65;font-weight:700;letter-spacing:.035em;text-align:center;box-shadow:0 8px 22px rgba(9,47,80,.14)}body:has(#hero-IC630MDL376) .page-right>:nth-child(3),body:has(#hero-IC630MDL376) .page-right>:nth-child(n+4){grid-colu...
Anfrage jetzt
IC630MDL375 GE Fanuc 16-Point 115/230 V AC Output Module
IC630MDL375 | GE Fanuc 16-Point 115/230 V AC Output Module
In stock ‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌ OFFICIAL PRODUCT · GE FANUC IC630MDL375 is a GE Fanuc Series Three 16-Point 115/230 V AC Output Module. Two groups of eight outputs each have a separate common and 5 A fuse. Record load current, inrush and group supply wiring, then apply the derating chart and verify every controlled load. STOCKAvailable WARRANTY1 Year Warranty DISPATCH2 days ORIGINUSA Configuration note: Model-identification graphic is not a product photograph. Request current supplied-unit photos and a readable IC630MDL375 nameplate before ordering. REQUEST A QUOTECHECK AVAILABILITY OFFICIAL SOURCE BASIS: GE Series Three Manual GEK-25376 body:has(#hero-IC630MDL375) .prom-right>.pro-table{display:none!important;border-top:0!important;margin-top:0!important;padding-top:0!important}body:has(#hero-IC630MDL375) .slider.autoplay4 .text{display:none!important}body:has(#hero-IC630MDL375) .prom-right>h1{font-family:Arial,'Segoe UI',Helvetica,sans-serif;color:#092f50;font-size:33px;line-height:1.14;font-weight:700;letter-spacing:-.55px;margin-bottom:15px}@media(min-width:768px){body:has(#hero-IC630MDL375) .page-right{display:grid!important;grid-template-columns:minmax(0,1fr) minmax(0,1fr);align-items:stretch}body:has(#hero-IC630MDL375) .page-right>.prom_img{grid-column:1;grid-row:1;float:none!important;width:auto!important;max-width:none!important;display:flex!important;flex-direction:column!important;box-sizing:border-box}body:has(#hero-IC630MDL375) .page-right>.prom-right{grid-column:2;grid-row:1;float:none!important;width:auto!important;max-width:none!important;box-sizing:border-box;margin-bottom:0!important}body:has(#hero-IC630MDL375) .prom_img:after{content:"OFFICIAL CONFIGURATION · IC630MDL375 · 16-POINT 115/230 V AC OUTPUT MODULE";display:block;margin-top:auto;margin-bottom:40px;padding:15px 17px;border-radius:6px;background:linear-gradient(135deg,#0a3658,#0b6e91);color:#fff;font-family:Arial,'Segoe UI',Helvetica,sans-serif;font-size:11px;line-height:1.65;font-weight:700;letter-spacing:.035em;text-align:center;box-shadow:0 8px 22px rgba(9,47,80,.14)}body:has(#hero-IC630MDL375) .page-right>:nth-child(3),body:has(#hero-IC630MDL375) .page-right>:nth-child(n+4){grid-column:1/-1;float:n...
Anfrage jetzt
IC630MDL368 GE Fanuc 2-Channel Unipolar Analog Output Module
IC630MDL368 | GE Fanuc 2-Channel Unipolar Analog Output Module
In stock ‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌ OFFICIAL PRODUCT · GE FANUC IC630MDL368 is the two-channel unipolar analog-voltage output module listed in the GE ordering guide, with a documented 0 to 10 V DC signal range. Match the receiving instrument and application scaling to this exact range. Preserve both channel assignments, then measure commanded values before restoring the process connection. STOCKAvailable WARRANTY1 Year Warranty DISPATCH2 days ORIGINUSA Configuration note: Model-identification graphic is not a product photograph. Request current supplied-unit photos and a readable IC630MDL368 nameplate before ordering. REQUEST A QUOTECHECK AVAILABILITY OFFICIAL SOURCE BASIS: GE Fanuc Product and Publications Ordering Guide GEP-791C body:has(#hero-IC630MDL368) .prom-right>.pro-table{display:none!important;border-top:0!important;margin-top:0!important;padding-top:0!important}body:has(#hero-IC630MDL368) .slider.autoplay4 .text{display:none!important}body:has(#hero-IC630MDL368) .prom-right>h1{font-family:Arial,'Segoe UI',Helvetica,sans-serif;color:#092f50;font-size:33px;line-height:1.14;font-weight:700;letter-spacing:-.55px;margin-bottom:15px}@media(min-width:768px){body:has(#hero-IC630MDL368) .page-right{display:grid!important;grid-template-columns:minmax(0,1fr) minmax(0,1fr);align-items:stretch}body:has(#hero-IC630MDL368) .page-right>.prom_img{grid-column:1;grid-row:1;float:none!important;width:auto!important;max-width:none!important;display:flex!important;flex-direction:column!important;box-sizing:border-box}body:has(#hero-IC630MDL368) .page-right>.prom-right{grid-column:2;grid-row:1;float:none!important;width:auto!important;max-width:none!important;box-sizing:border-box;margin-bottom:0!important}body:has(#hero-IC630MDL368) .prom_img:after{content:"OFFICIAL CONFIGURATION · IC630MDL368 · 2-CHANNEL UNIPOLAR ANALOG OUTPUT MODULE";display:block;margin-top:auto;margin-bottom:40px;padding:15px 17px;border-radius:6px;background:linear-gradient(135deg,#0a3658,#0b6e91);color:#fff;font-family:Arial,'Segoe UI',Helvetica,sans-serif;font-size:11px;line-height:1.65;font-weight:700;letter-spacing:.035em;text-align:center;box-shadow:0 8px 22px rgba(9,47,80,.14)}body:has(#hero-IC630MDL368) .page-right...
Anfrage jetzt
IC630MDL367 GE Fanuc 2-Channel Bipolar Analog Output Module
IC630MDL367 | GE Fanuc 2-Channel Bipolar Analog Output Module
In stock ‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌ OFFICIAL PRODUCT · GE FANUC IC630MDL367 is the two-channel bipolar analog-voltage output module listed in the GE ordering guide, with a documented +/-10 V DC signal range. Match the receiving instrument and application scaling to this exact range. Preserve both channel assignments, then measure commanded values before restoring the process connection. STOCKAvailable WARRANTY1 Year Warranty DISPATCH2 days ORIGINUSA Configuration note: Model-identification graphic is not a product photograph. Request current supplied-unit photos and a readable IC630MDL367 nameplate before ordering. REQUEST A QUOTECHECK AVAILABILITY OFFICIAL SOURCE BASIS: GE Fanuc Product and Publications Ordering Guide GEP-791C body:has(#hero-IC630MDL367) .prom-right>.pro-table{display:none!important;border-top:0!important;margin-top:0!important;padding-top:0!important}body:has(#hero-IC630MDL367) .slider.autoplay4 .text{display:none!important}body:has(#hero-IC630MDL367) .prom-right>h1{font-family:Arial,'Segoe UI',Helvetica,sans-serif;color:#092f50;font-size:33px;line-height:1.14;font-weight:700;letter-spacing:-.55px;margin-bottom:15px}@media(min-width:768px){body:has(#hero-IC630MDL367) .page-right{display:grid!important;grid-template-columns:minmax(0,1fr) minmax(0,1fr);align-items:stretch}body:has(#hero-IC630MDL367) .page-right>.prom_img{grid-column:1;grid-row:1;float:none!important;width:auto!important;max-width:none!important;display:flex!important;flex-direction:column!important;box-sizing:border-box}body:has(#hero-IC630MDL367) .page-right>.prom-right{grid-column:2;grid-row:1;float:none!important;width:auto!important;max-width:none!important;box-sizing:border-box;margin-bottom:0!important}body:has(#hero-IC630MDL367) .prom_img:after{content:"OFFICIAL CONFIGURATION · IC630MDL367 · 2-CHANNEL BIPOLAR ANALOG OUTPUT MODULE";display:block;margin-top:auto;margin-bottom:40px;padding:15px 17px;border-radius:6px;background:linear-gradient(135deg,#0a3658,#0b6e91);color:#fff;font-family:Arial,'Segoe UI',Helvetica,sans-serif;font-size:11px;line-height:1.65;font-weight:700;letter-spacing:.035em;text-align:center;box-shadow:0 8px 22px rgba(9,47,80,.14)}body:has(#hero-IC630MDL367) .page-right>:nt...
Anfrage jetzt
IC630MDL366 GE Fanuc 2-Channel Analog Output Module
IC630MDL366 | GE Fanuc 2-Channel Analog Output Module
In stock ‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌ OFFICIAL PRODUCT · GE FANUC IC630MDL366 is a GE Fanuc Series Three 2-Channel Analog Output Module. The manufacturer bulletin documents 1 to 5 V and 4 to 20 mA outputs, with a 400-ohm maximum current-mode load. Preserve channel scaling and loop wiring, then validate both outputs against calibrated receiving equipment. STOCKAvailable WARRANTY1 Year Warranty DISPATCH2 days ORIGINUSA Configuration note: Model-identification graphic is not a product photograph. Request current supplied-unit photos and a readable IC630MDL366 nameplate before ordering. REQUEST A QUOTECHECK AVAILABILITY OFFICIAL SOURCE BASIS: GE Series Three Supplement GEK-90819, Bulletin 4A-008 body:has(#hero-IC630MDL366) .prom-right>.pro-table{display:none!important;border-top:0!important;margin-top:0!important;padding-top:0!important}body:has(#hero-IC630MDL366) .slider.autoplay4 .text{display:none!important}body:has(#hero-IC630MDL366) .prom-right>h1{font-family:Arial,'Segoe UI',Helvetica,sans-serif;color:#092f50;font-size:33px;line-height:1.14;font-weight:700;letter-spacing:-.55px;margin-bottom:15px}@media(min-width:768px){body:has(#hero-IC630MDL366) .page-right{display:grid!important;grid-template-columns:minmax(0,1fr) minmax(0,1fr);align-items:stretch}body:has(#hero-IC630MDL366) .page-right>.prom_img{grid-column:1;grid-row:1;float:none!important;width:auto!important;max-width:none!important;display:flex!important;flex-direction:column!important;box-sizing:border-box}body:has(#hero-IC630MDL366) .page-right>.prom-right{grid-column:2;grid-row:1;float:none!important;width:auto!important;max-width:none!important;box-sizing:border-box;margin-bottom:0!important}body:has(#hero-IC630MDL366) .prom_img:after{content:"OFFICIAL CONFIGURATION · IC630MDL366 · 2-CHANNEL ANALOG OUTPUT MODULE";display:block;margin-top:auto;margin-bottom:40px;padding:15px 17px;border-radius:6px;background:linear-gradient(135deg,#0a3658,#0b6e91);color:#fff;font-family:Arial,'Segoe UI',Helvetica,sans-serif;font-size:11px;line-height:1.65;font-weight:700;letter-spacing:.035em;text-align:center;box-shadow:0 8px 22px rgba(9,47,80,.14)}body:has(#hero-IC630MDL366) .page-right>:nth-child(3),body:has(#hero-IC630MDL366) .page-ri...
Anfrage jetzt
IC630MDL357 GE Fanuc 16-Point 24 V DC Source Output Module
IC630MDL357 | GE Fanuc 16-Point 24 V DC Source Output Module
In stock ‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌ OFFICIAL PRODUCT · GE FANUC IC630MDL357 is the sixteen-point 24 V DC source-output module listed for the GE Series Three platform. The sourcing direction must match the installed load return and cannot be inferred from a nearby sinking-output catalog number. Record wiring and load requirements, then verify each controlled circuit before service. STOCKAvailable WARRANTY1 Year Warranty DISPATCH2 days ORIGINUSA Configuration note: Model-identification graphic is not a product photograph. Request current supplied-unit photos and a readable IC630MDL357 nameplate before ordering. REQUEST A QUOTECHECK AVAILABILITY OFFICIAL SOURCE BASIS: GE Fanuc Product and Publications Ordering Guide GEP-791C body:has(#hero-IC630MDL357) .prom-right>.pro-table{display:none!important;border-top:0!important;margin-top:0!important;padding-top:0!important}body:has(#hero-IC630MDL357) .slider.autoplay4 .text{display:none!important}body:has(#hero-IC630MDL357) .prom-right>h1{font-family:Arial,'Segoe UI',Helvetica,sans-serif;color:#092f50;font-size:33px;line-height:1.14;font-weight:700;letter-spacing:-.55px;margin-bottom:15px}@media(min-width:768px){body:has(#hero-IC630MDL357) .page-right{display:grid!important;grid-template-columns:minmax(0,1fr) minmax(0,1fr);align-items:stretch}body:has(#hero-IC630MDL357) .page-right>.prom_img{grid-column:1;grid-row:1;float:none!important;width:auto!important;max-width:none!important;display:flex!important;flex-direction:column!important;box-sizing:border-box}body:has(#hero-IC630MDL357) .page-right>.prom-right{grid-column:2;grid-row:1;float:none!important;width:auto!important;max-width:none!important;box-sizing:border-box;margin-bottom:0!important}body:has(#hero-IC630MDL357) .prom_img:after{content:"OFFICIAL CONFIGURATION · IC630MDL357 · 16-POINT 24 V DC SOURCE OUTPUT MODULE";display:block;margin-top:auto;margin-bottom:40px;padding:15px 17px;border-radius:6px;background:linear-gradient(135deg,#0a3658,#0b6e91);color:#fff;font-family:Arial,'Segoe UI',Helvetica,sans-serif;font-size:11px;line-height:1.65;font-weight:700;letter-spacing:.035em;text-align:center;box-shadow:0 8px 22px rgba(9,47,80,.14)}body:has(#hero-IC630MDL357) .page-right>:nth-child...
Anfrage jetzt
IC630MDL356 GE Fanuc 32-Point 24 V DC Sink Output Module
IC630MDL356 | GE Fanuc 32-Point 24 V DC Sink Output Module
In stock ‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌ OFFICIAL PRODUCT · GE FANUC IC630MDL356 is identified in the GE ordering guide as a thirty-two-point 24 V DC sink-output module with a D connector and LED indication. Its field interface must be checked independently from terminal-wired variants. Preserve the connector pin map and load references, then verify polarity and each commanded output. STOCKAvailable WARRANTY1 Year Warranty DISPATCH2 days ORIGINUSA Configuration note: Model-identification graphic is not a product photograph. Request current supplied-unit photos and a readable IC630MDL356 nameplate before ordering. REQUEST A QUOTECHECK AVAILABILITY OFFICIAL SOURCE BASIS: GE Fanuc Product and Publications Ordering Guide GEP-791C body:has(#hero-IC630MDL356) .prom-right>.pro-table{display:none!important;border-top:0!important;margin-top:0!important;padding-top:0!important}body:has(#hero-IC630MDL356) .slider.autoplay4 .text{display:none!important}body:has(#hero-IC630MDL356) .prom-right>h1{font-family:Arial,'Segoe UI',Helvetica,sans-serif;color:#092f50;font-size:33px;line-height:1.14;font-weight:700;letter-spacing:-.55px;margin-bottom:15px}@media(min-width:768px){body:has(#hero-IC630MDL356) .page-right{display:grid!important;grid-template-columns:minmax(0,1fr) minmax(0,1fr);align-items:stretch}body:has(#hero-IC630MDL356) .page-right>.prom_img{grid-column:1;grid-row:1;float:none!important;width:auto!important;max-width:none!important;display:flex!important;flex-direction:column!important;box-sizing:border-box}body:has(#hero-IC630MDL356) .page-right>.prom-right{grid-column:2;grid-row:1;float:none!important;width:auto!important;max-width:none!important;box-sizing:border-box;margin-bottom:0!important}body:has(#hero-IC630MDL356) .prom_img:after{content:"OFFICIAL CONFIGURATION · IC630MDL356 · 32-POINT 24 V DC SINK OUTPUT MODULE";display:block;margin-top:auto;margin-bottom:40px;padding:15px 17px;border-radius:6px;background:linear-gradient(135deg,#0a3658,#0b6e91);color:#fff;font-family:Arial,'Segoe UI',Helvetica,sans-serif;font-size:11px;line-height:1.65;font-weight:700;letter-spacing:.035em;text-align:center;box-shadow:0 8px 22px rgba(9,47,80,.14)}body:has(#hero-IC630MDL356) .page-right>:nth-child(3)...
Anfrage jetzt
Lass uns zusammenarbeiten
stecken in einer kritischen Situation? moore automation bietet seinen Kunden weltweit eine Vielzahl von Dienstleistungen an. Kontaktieren Sie uns noch heute, um herauszufinden, wie Unser erfahrenes Team kann Ihnen helfen, Ausfallzeiten zu minimieren.
kontaktiere uns

Heim

Produkte

whatsapp