Global industrial control system spare parts manufacturer

IC697CBL700 | GE Verlängerungskabel

auf Lager#

  • Marke / Hersteller:

    GE FANUC
  • Maße:

    3.5 cm x 13 cm x 13.5 cm
  • Gewicht:

    0.3 kg
  • Land von Herkunft: :

    USA
  • Bezeichnung:

    GE IC697CBL700 Extension cable

Herstellernummer:

IC697CBL700

Hersteller: GE FANUC
Beschreibung: GE IC697CBL700 Verlängerungskabel
Vollständige Beschreibung: GE IC697CBL700 Verlängerungskabel. Das Kabel IC697CBL700 der Serie 90-70 ist ein Verlängerungskabel für Netzteile von GE Fanuc. Es ermöglicht den Betrieb von zwei Racks mit nur einem Netzteil. Das zweite Rack benötigt dabei weniger Strom als das erste. Das Kabel IC697CBL700 kann direkt an den auf der Rückwand montierten Anschluss angeschlossen werden.
Status: Auf Lager


Klicken Sie hier, um den Preis zu erhalten: :[email protected]     :+86 18020776786

                                      : live:onlywnn_1                        : Mooreplc


Moore Automation Limited ist weder mit General Electric verbunden noch deren Vertriebspartner. Die Abbildung, Beschreibung oder der Verkauf von Produkten mit Namen, Marken und Logos dient ausschließlich der Identifizierung und/oder als Referenz und stellt keine Verbindung zu oder Autorisierung durch einen Rechteinhaber dar.

Das Kabel IC697CBL700 der Serie 90-70 ist ein Verlängerungskabel für Netzteile von GE Fanuc. Es dient dazu, zwei Racks mit einem einzigen Netzteil zu betreiben. Das zweite Rack benötigt dabei weniger Strom als das erste. Das Kabel wird direkt an den rückseitig montierten Anschluss angeschlossen und ist mit AC/DC-Netzteilen mit 55 und 100 Watt Nennleistung kompatibel. Es überträgt 5 Volt vom Stromverteiler zum zweiten Rack sowie ein Steuersignal. Zur Steuerung werden die Signale ACFAIL und SYSRESET übertragen. Das ACFAIL-Signal wird nach Anlegen der 5-Volt-Spannung auf „false“ gesetzt. Das SYSRESET-Signal bleibt nach Anlegen der 5 Volt bis zu 200 Millisekunden im Reset-Zustand.
Das Verlängerungskabel IC697CBL700 der Serie 90-70 verfügt über einen 9-poligen D-Sub-Stecker. Der Eingangsspannungsbereich des Kabels liegt zwischen 50 und 60 Hertz. Das Verlängerungskabel ist mit einem Überspannungs- und Überstromschutz ausgestattet. Im Fehlerfall im Netzteil löst die Sicherung aus. Zum zusätzlichen Schutz ist eine Abdeckplatte im Lieferumfang enthalten. Die Montage erfolgt mit vier M2,5-Schrauben. Die Betriebstemperatur sollte 50 °C nicht überschreiten. Bei Temperaturen über 50 °C muss die maximale Ausgangsleistung reduziert werden. Das IC697CBL700-Kabel ermöglicht den Anschluss verschiedener IC697-Module im zweiten Rack-Steckplatz, die mit 12 Volt betrieben werden können. Beim Einbau sollte das Verlängerungskabel nicht zu stark geknickt werden, um Beschädigungen zu vermeiden.


Falls Sie Produkte anderer Marken wie die unten aufgeführten benötigen, schreiben Sie uns bitte eine E-Mail an [email protected] 

Sie erhalten den besten Preis und professionellen Service (rund um die Uhr).

Marke

GE Fanuc

Serie

Serie 90-70

Teilenummer

IC697CBL700

Beschreibung

Netzteil Verlängerungskabel

Stromspannung

5 Volt

Frequenz

50-60 Hertz

Temperatur

0-50 Grad Celsius

Zeitraum zurücksetzen

200 Millisekunden

Kompatibilität

55/100 Watt AC/DC

Steckverbinder

9-poliger D-Stecker

Montage

M 2,5 Schrauben

Empfohlenes Modell

Bently, Nevada

125720-01

SIEMENS

6ES7336-4GE00-0AB0

PHOENIX KONTAKT

2866721 -- 12V *20A

1756-M16SE

Schneider

XBTGT7340

YOKOGAWA

SDV541-S23

1771-P5E

1756-L62

GESCHICKT

MOTIONBLOX-10

ABB

SDCS-CON-2B

Bachmann

RS232/422

EPRO

PR9376/010-011

ABB

NBRC-61C

Bachmann

AIO288/1

Bentley Nevada

330180-50-00

ABB

IMMFP02

GE

UR 9NH UR9NH CPUUR

1756-OB32

ABB

DI820 3BSE008512R1

Schneider

140CRA93100

SIEMENS

6ES5451-8MD11

ABB

SDCS-PIN-48 3BSE004939R0002

Bentley Nevada

330103-00-07-05-02-00

Schneider

140SDO95300S

1771-IL/C

SIEMENS

6ES7414-3XM05-0AB0

WESTINGHOUSE

1C31189G01

SMC

SQ2431N-5-C6-Q

SCHARF

ZW-162S

SIEMENS

6ES7214-1BD22-0XB0

TDK-Lambda

MV6500436A

SIEMENS

6ES7131-4BF00-0AB0

Schneider

140DVO85300

ABB

SNAT 609 SNAT609

ABB

CI801 3BSE022366R2

ICS TRIPLEX

T8480C

Lenovo

D330

ABB

3HAC026525-001

GE

IC693MDL645

SIEMENS

6ES7193-4DL10-0AA0

Bild-/Videoanfrage
Der Kauf von Ausrüstung muss nicht immer ein Glücksspiel sein. Wir wissen, dass es beim Kauf von Ausrüstung an Bord viele Unterschiede gibt und die Auswahl zwischen verschiedenen Produkten oft schwierig ist, insbesondere wenn die Ausrüstung nicht direkt vor einem steht.

Was wäre, wenn Sie ein Gerät vor dem Kauf begutachten könnten? Nicht nur ein Bild von der Website des Herstellers, sondern das tatsächliche Gerät, das Sie erhalten würden.

Mit Video bringen wir Sie der Besichtigung der Geräte, an denen Sie interessiert sind, einen Schritt näher, ohne dass Sie darauf warten müssen, dass die Geräte bei Ihnen vor der Tür eintreffen.

Fordern Sie ein Video an, um das Gerät, an dem Sie interessiert sind, vor dem Kauf genau zu sehen. Sie können sich die Etiketten mit der Seriennummer oder den allgemeinen Zustand des Geräts aus der Nähe ansehen.

Es ist, als ob der Laden zu Ihnen käme!

Anfrage für Video/Bild

Welche Kunden sagen sagen?
Alastair S

Wieder einmal sehr guter und schneller Service.
Williamson

Effiziente Kommunikation und schnelle Lieferung.
  • 93 %
    Pünktliche Lieferungen
  • 50.000
    Lagerfläche (Quadratfuß)
  • 138
    Bediente Länder
  • 20+
    Jahre im Geschäft
Verwandte Produkte
IC630MDL380 GE Fanuc 16-Point Relay Output Module
IC630MDL380 | GE Fanuc 16-Point Relay Output Module
In stock ‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌ OFFICIAL PRODUCT · GE FANUC IC630MDL380 is a GE Fanuc Series Three 16-Point Relay Output Module. The manufacturer table lists 5 to 265 V AC/DC maximum switching voltage, 4 A continuous current and 5 ms operating delays. Preserve group supplies and load type, then check contact protection and switching duty before service. STOCKAvailable WARRANTY1 Year Warranty DISPATCH2 days ORIGINUSA Configuration note: Model-identification graphic is not a product photograph. Request current supplied-unit photos and a readable IC630MDL380 nameplate before ordering. REQUEST A QUOTECHECK AVAILABILITY OFFICIAL SOURCE BASIS: GE Series Three Manual GEK-25376 body:has(#hero-IC630MDL380) .prom-right>.pro-table{display:none!important;border-top:0!important;margin-top:0!important;padding-top:0!important}body:has(#hero-IC630MDL380) .slider.autoplay4 .text{display:none!important}body:has(#hero-IC630MDL380) .prom-right>h1{font-family:Arial,'Segoe UI',Helvetica,sans-serif;color:#092f50;font-size:33px;line-height:1.14;font-weight:700;letter-spacing:-.55px;margin-bottom:15px}@media(min-width:768px){body:has(#hero-IC630MDL380) .page-right{display:grid!important;grid-template-columns:minmax(0,1fr) minmax(0,1fr);align-items:stretch}body:has(#hero-IC630MDL380) .page-right>.prom_img{grid-column:1;grid-row:1;float:none!important;width:auto!important;max-width:none!important;display:flex!important;flex-direction:column!important;box-sizing:border-box}body:has(#hero-IC630MDL380) .page-right>.prom-right{grid-column:2;grid-row:1;float:none!important;width:auto!important;max-width:none!important;box-sizing:border-box;margin-bottom:0!important}body:has(#hero-IC630MDL380) .prom_img:after{content:"OFFICIAL CONFIGURATION · IC630MDL380 · 16-POINT RELAY OUTPUT MODULE";display:block;margin-top:auto;margin-bottom:40px;padding:15px 17px;border-radius:6px;background:linear-gradient(135deg,#0a3658,#0b6e91);color:#fff;font-family:Arial,'Segoe UI',Helvetica,sans-serif;font-size:11px;line-height:1.65;font-weight:700;letter-spacing:.035em;text-align:center;box-shadow:0 8px 22px rgba(9,47,80,.14)}body:has(#hero-IC630MDL380) .page-right>:nth-child(3),body:has(#hero-IC630MDL380) .page-right>:nth-child(n+4...
Anfrage jetzt
IC630MDL376 GE Fanuc 8-Point Isolated AC Output Module
IC630MDL376 | GE Fanuc 8-Point Isolated AC Output Module
In stock ‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌ OFFICIAL PRODUCT · GE FANUC IC630MDL376 is a GE Fanuc Series Three 8-Point Isolated AC Output Module. The manual specifies 97 to 265 V AC operation, up to 2 A per circuit and individual 3 A fuses. Preserve each source/load pair, verify inrush and derating, then test all outputs under controlled conditions. STOCKAvailable WARRANTY1 Year Warranty DISPATCH2 days ORIGINUSA Configuration note: Model-identification graphic is not a product photograph. Request current supplied-unit photos and a readable IC630MDL376 nameplate before ordering. REQUEST A QUOTECHECK AVAILABILITY OFFICIAL SOURCE BASIS: GE Series Three Manual GEK-25376 body:has(#hero-IC630MDL376) .prom-right>.pro-table{display:none!important;border-top:0!important;margin-top:0!important;padding-top:0!important}body:has(#hero-IC630MDL376) .slider.autoplay4 .text{display:none!important}body:has(#hero-IC630MDL376) .prom-right>h1{font-family:Arial,'Segoe UI',Helvetica,sans-serif;color:#092f50;font-size:33px;line-height:1.14;font-weight:700;letter-spacing:-.55px;margin-bottom:15px}@media(min-width:768px){body:has(#hero-IC630MDL376) .page-right{display:grid!important;grid-template-columns:minmax(0,1fr) minmax(0,1fr);align-items:stretch}body:has(#hero-IC630MDL376) .page-right>.prom_img{grid-column:1;grid-row:1;float:none!important;width:auto!important;max-width:none!important;display:flex!important;flex-direction:column!important;box-sizing:border-box}body:has(#hero-IC630MDL376) .page-right>.prom-right{grid-column:2;grid-row:1;float:none!important;width:auto!important;max-width:none!important;box-sizing:border-box;margin-bottom:0!important}body:has(#hero-IC630MDL376) .prom_img:after{content:"OFFICIAL CONFIGURATION · IC630MDL376 · 8-POINT ISOLATED AC OUTPUT MODULE";display:block;margin-top:auto;margin-bottom:40px;padding:15px 17px;border-radius:6px;background:linear-gradient(135deg,#0a3658,#0b6e91);color:#fff;font-family:Arial,'Segoe UI',Helvetica,sans-serif;font-size:11px;line-height:1.65;font-weight:700;letter-spacing:.035em;text-align:center;box-shadow:0 8px 22px rgba(9,47,80,.14)}body:has(#hero-IC630MDL376) .page-right>:nth-child(3),body:has(#hero-IC630MDL376) .page-right>:nth-child(n+4){grid-colu...
Anfrage jetzt
IC630MDL375 GE Fanuc 16-Point 115/230 V AC Output Module
IC630MDL375 | GE Fanuc 16-Point 115/230 V AC Output Module
In stock ‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌ OFFICIAL PRODUCT · GE FANUC IC630MDL375 is a GE Fanuc Series Three 16-Point 115/230 V AC Output Module. Two groups of eight outputs each have a separate common and 5 A fuse. Record load current, inrush and group supply wiring, then apply the derating chart and verify every controlled load. STOCKAvailable WARRANTY1 Year Warranty DISPATCH2 days ORIGINUSA Configuration note: Model-identification graphic is not a product photograph. Request current supplied-unit photos and a readable IC630MDL375 nameplate before ordering. REQUEST A QUOTECHECK AVAILABILITY OFFICIAL SOURCE BASIS: GE Series Three Manual GEK-25376 body:has(#hero-IC630MDL375) .prom-right>.pro-table{display:none!important;border-top:0!important;margin-top:0!important;padding-top:0!important}body:has(#hero-IC630MDL375) .slider.autoplay4 .text{display:none!important}body:has(#hero-IC630MDL375) .prom-right>h1{font-family:Arial,'Segoe UI',Helvetica,sans-serif;color:#092f50;font-size:33px;line-height:1.14;font-weight:700;letter-spacing:-.55px;margin-bottom:15px}@media(min-width:768px){body:has(#hero-IC630MDL375) .page-right{display:grid!important;grid-template-columns:minmax(0,1fr) minmax(0,1fr);align-items:stretch}body:has(#hero-IC630MDL375) .page-right>.prom_img{grid-column:1;grid-row:1;float:none!important;width:auto!important;max-width:none!important;display:flex!important;flex-direction:column!important;box-sizing:border-box}body:has(#hero-IC630MDL375) .page-right>.prom-right{grid-column:2;grid-row:1;float:none!important;width:auto!important;max-width:none!important;box-sizing:border-box;margin-bottom:0!important}body:has(#hero-IC630MDL375) .prom_img:after{content:"OFFICIAL CONFIGURATION · IC630MDL375 · 16-POINT 115/230 V AC OUTPUT MODULE";display:block;margin-top:auto;margin-bottom:40px;padding:15px 17px;border-radius:6px;background:linear-gradient(135deg,#0a3658,#0b6e91);color:#fff;font-family:Arial,'Segoe UI',Helvetica,sans-serif;font-size:11px;line-height:1.65;font-weight:700;letter-spacing:.035em;text-align:center;box-shadow:0 8px 22px rgba(9,47,80,.14)}body:has(#hero-IC630MDL375) .page-right>:nth-child(3),body:has(#hero-IC630MDL375) .page-right>:nth-child(n+4){grid-column:1/-1;float:n...
Anfrage jetzt
IC630MDL368 GE Fanuc 2-Channel Unipolar Analog Output Module
IC630MDL368 | GE Fanuc 2-Channel Unipolar Analog Output Module
In stock ‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌ OFFICIAL PRODUCT · GE FANUC IC630MDL368 is the two-channel unipolar analog-voltage output module listed in the GE ordering guide, with a documented 0 to 10 V DC signal range. Match the receiving instrument and application scaling to this exact range. Preserve both channel assignments, then measure commanded values before restoring the process connection. STOCKAvailable WARRANTY1 Year Warranty DISPATCH2 days ORIGINUSA Configuration note: Model-identification graphic is not a product photograph. Request current supplied-unit photos and a readable IC630MDL368 nameplate before ordering. REQUEST A QUOTECHECK AVAILABILITY OFFICIAL SOURCE BASIS: GE Fanuc Product and Publications Ordering Guide GEP-791C body:has(#hero-IC630MDL368) .prom-right>.pro-table{display:none!important;border-top:0!important;margin-top:0!important;padding-top:0!important}body:has(#hero-IC630MDL368) .slider.autoplay4 .text{display:none!important}body:has(#hero-IC630MDL368) .prom-right>h1{font-family:Arial,'Segoe UI',Helvetica,sans-serif;color:#092f50;font-size:33px;line-height:1.14;font-weight:700;letter-spacing:-.55px;margin-bottom:15px}@media(min-width:768px){body:has(#hero-IC630MDL368) .page-right{display:grid!important;grid-template-columns:minmax(0,1fr) minmax(0,1fr);align-items:stretch}body:has(#hero-IC630MDL368) .page-right>.prom_img{grid-column:1;grid-row:1;float:none!important;width:auto!important;max-width:none!important;display:flex!important;flex-direction:column!important;box-sizing:border-box}body:has(#hero-IC630MDL368) .page-right>.prom-right{grid-column:2;grid-row:1;float:none!important;width:auto!important;max-width:none!important;box-sizing:border-box;margin-bottom:0!important}body:has(#hero-IC630MDL368) .prom_img:after{content:"OFFICIAL CONFIGURATION · IC630MDL368 · 2-CHANNEL UNIPOLAR ANALOG OUTPUT MODULE";display:block;margin-top:auto;margin-bottom:40px;padding:15px 17px;border-radius:6px;background:linear-gradient(135deg,#0a3658,#0b6e91);color:#fff;font-family:Arial,'Segoe UI',Helvetica,sans-serif;font-size:11px;line-height:1.65;font-weight:700;letter-spacing:.035em;text-align:center;box-shadow:0 8px 22px rgba(9,47,80,.14)}body:has(#hero-IC630MDL368) .page-right...
Anfrage jetzt
IC630MDL367 GE Fanuc 2-Channel Bipolar Analog Output Module
IC630MDL367 | GE Fanuc 2-Channel Bipolar Analog Output Module
In stock ‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌ OFFICIAL PRODUCT · GE FANUC IC630MDL367 is the two-channel bipolar analog-voltage output module listed in the GE ordering guide, with a documented +/-10 V DC signal range. Match the receiving instrument and application scaling to this exact range. Preserve both channel assignments, then measure commanded values before restoring the process connection. STOCKAvailable WARRANTY1 Year Warranty DISPATCH2 days ORIGINUSA Configuration note: Model-identification graphic is not a product photograph. Request current supplied-unit photos and a readable IC630MDL367 nameplate before ordering. REQUEST A QUOTECHECK AVAILABILITY OFFICIAL SOURCE BASIS: GE Fanuc Product and Publications Ordering Guide GEP-791C body:has(#hero-IC630MDL367) .prom-right>.pro-table{display:none!important;border-top:0!important;margin-top:0!important;padding-top:0!important}body:has(#hero-IC630MDL367) .slider.autoplay4 .text{display:none!important}body:has(#hero-IC630MDL367) .prom-right>h1{font-family:Arial,'Segoe UI',Helvetica,sans-serif;color:#092f50;font-size:33px;line-height:1.14;font-weight:700;letter-spacing:-.55px;margin-bottom:15px}@media(min-width:768px){body:has(#hero-IC630MDL367) .page-right{display:grid!important;grid-template-columns:minmax(0,1fr) minmax(0,1fr);align-items:stretch}body:has(#hero-IC630MDL367) .page-right>.prom_img{grid-column:1;grid-row:1;float:none!important;width:auto!important;max-width:none!important;display:flex!important;flex-direction:column!important;box-sizing:border-box}body:has(#hero-IC630MDL367) .page-right>.prom-right{grid-column:2;grid-row:1;float:none!important;width:auto!important;max-width:none!important;box-sizing:border-box;margin-bottom:0!important}body:has(#hero-IC630MDL367) .prom_img:after{content:"OFFICIAL CONFIGURATION · IC630MDL367 · 2-CHANNEL BIPOLAR ANALOG OUTPUT MODULE";display:block;margin-top:auto;margin-bottom:40px;padding:15px 17px;border-radius:6px;background:linear-gradient(135deg,#0a3658,#0b6e91);color:#fff;font-family:Arial,'Segoe UI',Helvetica,sans-serif;font-size:11px;line-height:1.65;font-weight:700;letter-spacing:.035em;text-align:center;box-shadow:0 8px 22px rgba(9,47,80,.14)}body:has(#hero-IC630MDL367) .page-right>:nt...
Anfrage jetzt
IC630MDL366 GE Fanuc 2-Channel Analog Output Module
IC630MDL366 | GE Fanuc 2-Channel Analog Output Module
In stock ‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌ OFFICIAL PRODUCT · GE FANUC IC630MDL366 is a GE Fanuc Series Three 2-Channel Analog Output Module. The manufacturer bulletin documents 1 to 5 V and 4 to 20 mA outputs, with a 400-ohm maximum current-mode load. Preserve channel scaling and loop wiring, then validate both outputs against calibrated receiving equipment. STOCKAvailable WARRANTY1 Year Warranty DISPATCH2 days ORIGINUSA Configuration note: Model-identification graphic is not a product photograph. Request current supplied-unit photos and a readable IC630MDL366 nameplate before ordering. REQUEST A QUOTECHECK AVAILABILITY OFFICIAL SOURCE BASIS: GE Series Three Supplement GEK-90819, Bulletin 4A-008 body:has(#hero-IC630MDL366) .prom-right>.pro-table{display:none!important;border-top:0!important;margin-top:0!important;padding-top:0!important}body:has(#hero-IC630MDL366) .slider.autoplay4 .text{display:none!important}body:has(#hero-IC630MDL366) .prom-right>h1{font-family:Arial,'Segoe UI',Helvetica,sans-serif;color:#092f50;font-size:33px;line-height:1.14;font-weight:700;letter-spacing:-.55px;margin-bottom:15px}@media(min-width:768px){body:has(#hero-IC630MDL366) .page-right{display:grid!important;grid-template-columns:minmax(0,1fr) minmax(0,1fr);align-items:stretch}body:has(#hero-IC630MDL366) .page-right>.prom_img{grid-column:1;grid-row:1;float:none!important;width:auto!important;max-width:none!important;display:flex!important;flex-direction:column!important;box-sizing:border-box}body:has(#hero-IC630MDL366) .page-right>.prom-right{grid-column:2;grid-row:1;float:none!important;width:auto!important;max-width:none!important;box-sizing:border-box;margin-bottom:0!important}body:has(#hero-IC630MDL366) .prom_img:after{content:"OFFICIAL CONFIGURATION · IC630MDL366 · 2-CHANNEL ANALOG OUTPUT MODULE";display:block;margin-top:auto;margin-bottom:40px;padding:15px 17px;border-radius:6px;background:linear-gradient(135deg,#0a3658,#0b6e91);color:#fff;font-family:Arial,'Segoe UI',Helvetica,sans-serif;font-size:11px;line-height:1.65;font-weight:700;letter-spacing:.035em;text-align:center;box-shadow:0 8px 22px rgba(9,47,80,.14)}body:has(#hero-IC630MDL366) .page-right>:nth-child(3),body:has(#hero-IC630MDL366) .page-ri...
Anfrage jetzt
IC630MDL357 GE Fanuc 16-Point 24 V DC Source Output Module
IC630MDL357 | GE Fanuc 16-Point 24 V DC Source Output Module
In stock ‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌ OFFICIAL PRODUCT · GE FANUC IC630MDL357 is the sixteen-point 24 V DC source-output module listed for the GE Series Three platform. The sourcing direction must match the installed load return and cannot be inferred from a nearby sinking-output catalog number. Record wiring and load requirements, then verify each controlled circuit before service. STOCKAvailable WARRANTY1 Year Warranty DISPATCH2 days ORIGINUSA Configuration note: Model-identification graphic is not a product photograph. Request current supplied-unit photos and a readable IC630MDL357 nameplate before ordering. REQUEST A QUOTECHECK AVAILABILITY OFFICIAL SOURCE BASIS: GE Fanuc Product and Publications Ordering Guide GEP-791C body:has(#hero-IC630MDL357) .prom-right>.pro-table{display:none!important;border-top:0!important;margin-top:0!important;padding-top:0!important}body:has(#hero-IC630MDL357) .slider.autoplay4 .text{display:none!important}body:has(#hero-IC630MDL357) .prom-right>h1{font-family:Arial,'Segoe UI',Helvetica,sans-serif;color:#092f50;font-size:33px;line-height:1.14;font-weight:700;letter-spacing:-.55px;margin-bottom:15px}@media(min-width:768px){body:has(#hero-IC630MDL357) .page-right{display:grid!important;grid-template-columns:minmax(0,1fr) minmax(0,1fr);align-items:stretch}body:has(#hero-IC630MDL357) .page-right>.prom_img{grid-column:1;grid-row:1;float:none!important;width:auto!important;max-width:none!important;display:flex!important;flex-direction:column!important;box-sizing:border-box}body:has(#hero-IC630MDL357) .page-right>.prom-right{grid-column:2;grid-row:1;float:none!important;width:auto!important;max-width:none!important;box-sizing:border-box;margin-bottom:0!important}body:has(#hero-IC630MDL357) .prom_img:after{content:"OFFICIAL CONFIGURATION · IC630MDL357 · 16-POINT 24 V DC SOURCE OUTPUT MODULE";display:block;margin-top:auto;margin-bottom:40px;padding:15px 17px;border-radius:6px;background:linear-gradient(135deg,#0a3658,#0b6e91);color:#fff;font-family:Arial,'Segoe UI',Helvetica,sans-serif;font-size:11px;line-height:1.65;font-weight:700;letter-spacing:.035em;text-align:center;box-shadow:0 8px 22px rgba(9,47,80,.14)}body:has(#hero-IC630MDL357) .page-right>:nth-child...
Anfrage jetzt
IC630MDL356 GE Fanuc 32-Point 24 V DC Sink Output Module
IC630MDL356 | GE Fanuc 32-Point 24 V DC Sink Output Module
In stock ‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌ OFFICIAL PRODUCT · GE FANUC IC630MDL356 is identified in the GE ordering guide as a thirty-two-point 24 V DC sink-output module with a D connector and LED indication. Its field interface must be checked independently from terminal-wired variants. Preserve the connector pin map and load references, then verify polarity and each commanded output. STOCKAvailable WARRANTY1 Year Warranty DISPATCH2 days ORIGINUSA Configuration note: Model-identification graphic is not a product photograph. Request current supplied-unit photos and a readable IC630MDL356 nameplate before ordering. REQUEST A QUOTECHECK AVAILABILITY OFFICIAL SOURCE BASIS: GE Fanuc Product and Publications Ordering Guide GEP-791C body:has(#hero-IC630MDL356) .prom-right>.pro-table{display:none!important;border-top:0!important;margin-top:0!important;padding-top:0!important}body:has(#hero-IC630MDL356) .slider.autoplay4 .text{display:none!important}body:has(#hero-IC630MDL356) .prom-right>h1{font-family:Arial,'Segoe UI',Helvetica,sans-serif;color:#092f50;font-size:33px;line-height:1.14;font-weight:700;letter-spacing:-.55px;margin-bottom:15px}@media(min-width:768px){body:has(#hero-IC630MDL356) .page-right{display:grid!important;grid-template-columns:minmax(0,1fr) minmax(0,1fr);align-items:stretch}body:has(#hero-IC630MDL356) .page-right>.prom_img{grid-column:1;grid-row:1;float:none!important;width:auto!important;max-width:none!important;display:flex!important;flex-direction:column!important;box-sizing:border-box}body:has(#hero-IC630MDL356) .page-right>.prom-right{grid-column:2;grid-row:1;float:none!important;width:auto!important;max-width:none!important;box-sizing:border-box;margin-bottom:0!important}body:has(#hero-IC630MDL356) .prom_img:after{content:"OFFICIAL CONFIGURATION · IC630MDL356 · 32-POINT 24 V DC SINK OUTPUT MODULE";display:block;margin-top:auto;margin-bottom:40px;padding:15px 17px;border-radius:6px;background:linear-gradient(135deg,#0a3658,#0b6e91);color:#fff;font-family:Arial,'Segoe UI',Helvetica,sans-serif;font-size:11px;line-height:1.65;font-weight:700;letter-spacing:.035em;text-align:center;box-shadow:0 8px 22px rgba(9,47,80,.14)}body:has(#hero-IC630MDL356) .page-right>:nth-child(3)...
Anfrage jetzt
Lass uns zusammenarbeiten
stecken in einer kritischen Situation? moore automation bietet seinen Kunden weltweit eine Vielzahl von Dienstleistungen an. Kontaktieren Sie uns noch heute, um herauszufinden, wie Unser erfahrenes Team kann Ihnen helfen, Ausfallzeiten zu minimieren.
kontaktiere uns

Heim

Produkte

whatsapp