Global industrial control system spare parts manufacturer

IC694ALG223A | General Electric analoges Stromeingangsmodul

auf Lager#

  • Marke / Hersteller:

    General Electric
  • Maße:

    3.5 cm x 13 cm x 13.5 cm
  • Gewicht:

    0.24 KG
  • Land von Herkunft: :

    USA
  • Bezeichnung:

    General Electric IC694ALG223A Analog Current Input Module

Hersteller. Teilenummer:

ic694alg223a

Hersteller: allgemeine Elektrik
Bezeichnung: General Electric IC694ALG223A analoges Stromeingangsmodul
Gesamte Beschreibung:

General Electric IC694ALG223A analoges Stromeingangsmodul mit 16 Kanälen/Single-Ended-Eingängen.

Status: versandfertig auf Lager




Klicken Sie, um den Preis zu erhalten:: [email protected]: +86 18020776786

: live:onlywnn_1: mooreplc


moore automation limited ist weder mit noch einem Distributor von verbunden ge/bently Nevada . die Darstellung, Beschreibung, oder der Verkauf von Produkten mit Namen, Warenzeichen, Marken, und Logos dient nur zu Identifikations- und/oder Referenzzwecken und weist nicht auf eine Zugehörigkeit zu oder Autorisierung durch hin jeder Rechteinhaber.

IC694ALG223 ist ein analoges Stromeingangsmodul mit 16 Kanälen/Single-Ended-Eingängen. Jeder Eingang kann mit der mitgelieferten Software für einen der drei Eingangsbereiche konfiguriert werden: 4 bis 20 mA, 0 bis 20 mA, oder 4 auf 20 mA erhöht.
Alarmgrenzwerte sind in allen Bereichen. im erweiterten Bereich von 4 bis 20 mA, in Hoch und/oder Tief verfügbar. Ein unterer Alarmgrenzwert kann Eingangsströme von 4 mA bis 0 mA erkennen,, was zu Drahtbruch führt Erkennung in 4- bis 20-mA-Anwendungen. Das Modul kann den Modulstatus und den Status der externen Stromversorgung über zugewiesene Programmreferenzadressen an die CPU melden. Die Installation des IC694ALG223-Moduls ist konsistent mit jedem E/A-Steckplatz in einem rx3i-System.
ic694alg223 verwendet 120 mA vom 5-VDC-Bus auf der SPS-Backplane und benötigt 65 mA plus Stromschleifenstrom(e) von einer vom Benutzer bereitgestellten +24-VDC-Versorgung.
Die LED MODULE OK gibt beim Einschalten Modulstatusinformationen aus. Wenn die LED EIN anzeigt,, ist der Status OK, und das Modul ist konfiguriert. Wenn sie AUS anzeigt,, dann ist keine Spannung an der Backplane vorhanden wird erkannt, oder der Watchdog-Timer ist abgelaufen). kontinuierliches schnelles Blinken: zeigt an, dass keine Konfigurationsdaten von der CPU empfangen werden. langsames Blinken gefolgt von AUS deutet auf eine fehlgeschlagene Einschaltdiagnose oder eine aufgetretene Codeausführung hin Fehler. Die LED für die Benutzerversorgung bestätigt, dass die externe 24-VDC-Versorgung innerhalb der erwarteten Spezifikationen liegt.
Zu den konfigurierbaren Parametern des IC694ALG223-Moduls gehören aktive Kanäle, Referenzadresse für Eingangsdaten, Länge und Bereich, Low/High-Alarm, und I/O-Scan-Set.



Wenn Sie Produkte anderer Marken wie unten , benötigen, schreiben Sie bitte eine E-Mail an [email protected]

Sie erhalten den besten Preis und professionellen Service (24/7)

Allgemeines

Hersteller

allgemeine Elektrik

Marke

allgemeine Elektrik

Teilenummer/Katalognummer.

ic694alg223a

Zustand

neu und original mit 1 jahr garantie

empfohlenes Modell

Abb

ypq202a YT204001-KB

SIEMENS

6AV6542-0BB15-2AX0

ABB

DSDP160 57160001-KG

ABB

HEIR445976R1 UN0950A-P v1

Alleine bradley

1794-it8

ics TRIPLEX

T8151

YOKOGAWA

EB501-10

ABB

DSQC352B 3hne00009-1/17

Alleine bradley

1761-net-aic

Siemens

3rg4143-6ad00

Yaskawa

cp-317/lio-01

Schneider

140cpu53414b

Woodward

8440-1884 easygen-2500-5

fanuc

a03b-0807-c154

Alleine bradley

1771-nbsc

Abb

SDCS-Pin-21 3ADT306200R1

GE

IC693CPU352

Honigbrunnen

MC-TAIH02 51304453-150

SIEMENS

6EP1334-2BA00

GE

IS415UCVHH1AB IS415UCVHH1A

EMERSON

KJ3203X1-BA1 12p3270x032

Abb

ci801

Siemens

6gk1561-1aa01

Philips

omm232

gebeugt Nevada

330106-05-30-05-02-cn

Siemens

6dp1511-8aa

Siemens

16418-531/1

Alleine bradley

1769-132c

gebeugt Nevada

133323-01

Schatz

mc-pdoy22 80363975-150

Omron

cqm1-pa216

Alleine bradley

1746sc-ctr4

Siemens

6es7318-2aj00-0ab0

Schneider

tsxp574634m

Sankieng

pmc2-sac-1a

Schatz

620-0080/vr3.1

Westhaus

1c31150g01

Siemens

6sc9413-0ea52

Abb

dsqc604 3HAC12928-1

SAIA

PCD1.M110


Bild-/Videoanfrage
der Kauf von Ausrüstung'muss nicht immer ein Schuss ins Blaue sein.wir wissen, dass es viele Unterschiede gibt, wenn es um den Kauf von Ausrüstung an Bord geht, und ziemlich oft, ist die Wahl zwischen verschiedenen Teilen schwierig,, besonders wenn die Ausrüstung sitzt nicht direkt vor Ihnen.

Nun, was wäre, wenn Sie ein Gerät sehen könnten, bevor Sie es gekauft haben? nicht nur ein Bild von der Website des Herstellers,, sondern das eigentliche Gerät, das Sie erhalten würden.

mit Video, bringen wir Sie einen Schritt näher an die Inspektion der Ausrüstung, an der Sie interessiert sind', ohne warten zu müssen, bis die Ausrüstung an Ihrer Tür erscheint.

Fordern Sie das Video an, um sich das eigentliche Gerät anzusehen, an dem Sie'interessiert sind, bevor Sie es kaufen. können Sie die Etiketten mit der Seriennummer oder den Gesamtzustand des Geräts aus der Nähe sehen.

Es ist, als ob der Laden zu Ihnen kommt!

Antrag auf vi Deo/Bild

Welche Kunden sagen sagen?
Barclay

Toller Service und schneller Fahrer
cheryl clary

Ich war sehr zufrieden mit dem Angebot und dem Zeitpunkt für den Versand des Materials und dessen Erhalt.





  • 93%
    PÜNKTLICHE LIEFERUNGEN
  • 50,000
    SQ FT-Lager
  • 138
    Länder bedient
  • 20+
    Jahre im Geschäft
Verwandte Produkte
IC630MDL380 GE Fanuc 16-Point Relay Output Module
IC630MDL380 | GE Fanuc 16-Point Relay Output Module
In stock ‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌ OFFICIAL PRODUCT · GE FANUC IC630MDL380 is a GE Fanuc Series Three 16-Point Relay Output Module. The manufacturer table lists 5 to 265 V AC/DC maximum switching voltage, 4 A continuous current and 5 ms operating delays. Preserve group supplies and load type, then check contact protection and switching duty before service. STOCKAvailable WARRANTY1 Year Warranty DISPATCH2 days ORIGINUSA Configuration note: Model-identification graphic is not a product photograph. Request current supplied-unit photos and a readable IC630MDL380 nameplate before ordering. REQUEST A QUOTECHECK AVAILABILITY OFFICIAL SOURCE BASIS: GE Series Three Manual GEK-25376 body:has(#hero-IC630MDL380) .prom-right>.pro-table{display:none!important;border-top:0!important;margin-top:0!important;padding-top:0!important}body:has(#hero-IC630MDL380) .slider.autoplay4 .text{display:none!important}body:has(#hero-IC630MDL380) .prom-right>h1{font-family:Arial,'Segoe UI',Helvetica,sans-serif;color:#092f50;font-size:33px;line-height:1.14;font-weight:700;letter-spacing:-.55px;margin-bottom:15px}@media(min-width:768px){body:has(#hero-IC630MDL380) .page-right{display:grid!important;grid-template-columns:minmax(0,1fr) minmax(0,1fr);align-items:stretch}body:has(#hero-IC630MDL380) .page-right>.prom_img{grid-column:1;grid-row:1;float:none!important;width:auto!important;max-width:none!important;display:flex!important;flex-direction:column!important;box-sizing:border-box}body:has(#hero-IC630MDL380) .page-right>.prom-right{grid-column:2;grid-row:1;float:none!important;width:auto!important;max-width:none!important;box-sizing:border-box;margin-bottom:0!important}body:has(#hero-IC630MDL380) .prom_img:after{content:"OFFICIAL CONFIGURATION · IC630MDL380 · 16-POINT RELAY OUTPUT MODULE";display:block;margin-top:auto;margin-bottom:40px;padding:15px 17px;border-radius:6px;background:linear-gradient(135deg,#0a3658,#0b6e91);color:#fff;font-family:Arial,'Segoe UI',Helvetica,sans-serif;font-size:11px;line-height:1.65;font-weight:700;letter-spacing:.035em;text-align:center;box-shadow:0 8px 22px rgba(9,47,80,.14)}body:has(#hero-IC630MDL380) .page-right>:nth-child(3),body:has(#hero-IC630MDL380) .page-right>:nth-child(n+4...
Anfrage jetzt
IC630MDL376 GE Fanuc 8-Point Isolated AC Output Module
IC630MDL376 | GE Fanuc 8-Point Isolated AC Output Module
In stock ‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌ OFFICIAL PRODUCT · GE FANUC IC630MDL376 is a GE Fanuc Series Three 8-Point Isolated AC Output Module. The manual specifies 97 to 265 V AC operation, up to 2 A per circuit and individual 3 A fuses. Preserve each source/load pair, verify inrush and derating, then test all outputs under controlled conditions. STOCKAvailable WARRANTY1 Year Warranty DISPATCH2 days ORIGINUSA Configuration note: Model-identification graphic is not a product photograph. Request current supplied-unit photos and a readable IC630MDL376 nameplate before ordering. REQUEST A QUOTECHECK AVAILABILITY OFFICIAL SOURCE BASIS: GE Series Three Manual GEK-25376 body:has(#hero-IC630MDL376) .prom-right>.pro-table{display:none!important;border-top:0!important;margin-top:0!important;padding-top:0!important}body:has(#hero-IC630MDL376) .slider.autoplay4 .text{display:none!important}body:has(#hero-IC630MDL376) .prom-right>h1{font-family:Arial,'Segoe UI',Helvetica,sans-serif;color:#092f50;font-size:33px;line-height:1.14;font-weight:700;letter-spacing:-.55px;margin-bottom:15px}@media(min-width:768px){body:has(#hero-IC630MDL376) .page-right{display:grid!important;grid-template-columns:minmax(0,1fr) minmax(0,1fr);align-items:stretch}body:has(#hero-IC630MDL376) .page-right>.prom_img{grid-column:1;grid-row:1;float:none!important;width:auto!important;max-width:none!important;display:flex!important;flex-direction:column!important;box-sizing:border-box}body:has(#hero-IC630MDL376) .page-right>.prom-right{grid-column:2;grid-row:1;float:none!important;width:auto!important;max-width:none!important;box-sizing:border-box;margin-bottom:0!important}body:has(#hero-IC630MDL376) .prom_img:after{content:"OFFICIAL CONFIGURATION · IC630MDL376 · 8-POINT ISOLATED AC OUTPUT MODULE";display:block;margin-top:auto;margin-bottom:40px;padding:15px 17px;border-radius:6px;background:linear-gradient(135deg,#0a3658,#0b6e91);color:#fff;font-family:Arial,'Segoe UI',Helvetica,sans-serif;font-size:11px;line-height:1.65;font-weight:700;letter-spacing:.035em;text-align:center;box-shadow:0 8px 22px rgba(9,47,80,.14)}body:has(#hero-IC630MDL376) .page-right>:nth-child(3),body:has(#hero-IC630MDL376) .page-right>:nth-child(n+4){grid-colu...
Anfrage jetzt
IC630MDL375 GE Fanuc 16-Point 115/230 V AC Output Module
IC630MDL375 | GE Fanuc 16-Point 115/230 V AC Output Module
In stock ‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌ OFFICIAL PRODUCT · GE FANUC IC630MDL375 is a GE Fanuc Series Three 16-Point 115/230 V AC Output Module. Two groups of eight outputs each have a separate common and 5 A fuse. Record load current, inrush and group supply wiring, then apply the derating chart and verify every controlled load. STOCKAvailable WARRANTY1 Year Warranty DISPATCH2 days ORIGINUSA Configuration note: Model-identification graphic is not a product photograph. Request current supplied-unit photos and a readable IC630MDL375 nameplate before ordering. REQUEST A QUOTECHECK AVAILABILITY OFFICIAL SOURCE BASIS: GE Series Three Manual GEK-25376 body:has(#hero-IC630MDL375) .prom-right>.pro-table{display:none!important;border-top:0!important;margin-top:0!important;padding-top:0!important}body:has(#hero-IC630MDL375) .slider.autoplay4 .text{display:none!important}body:has(#hero-IC630MDL375) .prom-right>h1{font-family:Arial,'Segoe UI',Helvetica,sans-serif;color:#092f50;font-size:33px;line-height:1.14;font-weight:700;letter-spacing:-.55px;margin-bottom:15px}@media(min-width:768px){body:has(#hero-IC630MDL375) .page-right{display:grid!important;grid-template-columns:minmax(0,1fr) minmax(0,1fr);align-items:stretch}body:has(#hero-IC630MDL375) .page-right>.prom_img{grid-column:1;grid-row:1;float:none!important;width:auto!important;max-width:none!important;display:flex!important;flex-direction:column!important;box-sizing:border-box}body:has(#hero-IC630MDL375) .page-right>.prom-right{grid-column:2;grid-row:1;float:none!important;width:auto!important;max-width:none!important;box-sizing:border-box;margin-bottom:0!important}body:has(#hero-IC630MDL375) .prom_img:after{content:"OFFICIAL CONFIGURATION · IC630MDL375 · 16-POINT 115/230 V AC OUTPUT MODULE";display:block;margin-top:auto;margin-bottom:40px;padding:15px 17px;border-radius:6px;background:linear-gradient(135deg,#0a3658,#0b6e91);color:#fff;font-family:Arial,'Segoe UI',Helvetica,sans-serif;font-size:11px;line-height:1.65;font-weight:700;letter-spacing:.035em;text-align:center;box-shadow:0 8px 22px rgba(9,47,80,.14)}body:has(#hero-IC630MDL375) .page-right>:nth-child(3),body:has(#hero-IC630MDL375) .page-right>:nth-child(n+4){grid-column:1/-1;float:n...
Anfrage jetzt
IC630MDL368 GE Fanuc 2-Channel Unipolar Analog Output Module
IC630MDL368 | GE Fanuc 2-Channel Unipolar Analog Output Module
In stock ‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌ OFFICIAL PRODUCT · GE FANUC IC630MDL368 is the two-channel unipolar analog-voltage output module listed in the GE ordering guide, with a documented 0 to 10 V DC signal range. Match the receiving instrument and application scaling to this exact range. Preserve both channel assignments, then measure commanded values before restoring the process connection. STOCKAvailable WARRANTY1 Year Warranty DISPATCH2 days ORIGINUSA Configuration note: Model-identification graphic is not a product photograph. Request current supplied-unit photos and a readable IC630MDL368 nameplate before ordering. REQUEST A QUOTECHECK AVAILABILITY OFFICIAL SOURCE BASIS: GE Fanuc Product and Publications Ordering Guide GEP-791C body:has(#hero-IC630MDL368) .prom-right>.pro-table{display:none!important;border-top:0!important;margin-top:0!important;padding-top:0!important}body:has(#hero-IC630MDL368) .slider.autoplay4 .text{display:none!important}body:has(#hero-IC630MDL368) .prom-right>h1{font-family:Arial,'Segoe UI',Helvetica,sans-serif;color:#092f50;font-size:33px;line-height:1.14;font-weight:700;letter-spacing:-.55px;margin-bottom:15px}@media(min-width:768px){body:has(#hero-IC630MDL368) .page-right{display:grid!important;grid-template-columns:minmax(0,1fr) minmax(0,1fr);align-items:stretch}body:has(#hero-IC630MDL368) .page-right>.prom_img{grid-column:1;grid-row:1;float:none!important;width:auto!important;max-width:none!important;display:flex!important;flex-direction:column!important;box-sizing:border-box}body:has(#hero-IC630MDL368) .page-right>.prom-right{grid-column:2;grid-row:1;float:none!important;width:auto!important;max-width:none!important;box-sizing:border-box;margin-bottom:0!important}body:has(#hero-IC630MDL368) .prom_img:after{content:"OFFICIAL CONFIGURATION · IC630MDL368 · 2-CHANNEL UNIPOLAR ANALOG OUTPUT MODULE";display:block;margin-top:auto;margin-bottom:40px;padding:15px 17px;border-radius:6px;background:linear-gradient(135deg,#0a3658,#0b6e91);color:#fff;font-family:Arial,'Segoe UI',Helvetica,sans-serif;font-size:11px;line-height:1.65;font-weight:700;letter-spacing:.035em;text-align:center;box-shadow:0 8px 22px rgba(9,47,80,.14)}body:has(#hero-IC630MDL368) .page-right...
Anfrage jetzt
IC630MDL367 GE Fanuc 2-Channel Bipolar Analog Output Module
IC630MDL367 | GE Fanuc 2-Channel Bipolar Analog Output Module
In stock ‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌ OFFICIAL PRODUCT · GE FANUC IC630MDL367 is the two-channel bipolar analog-voltage output module listed in the GE ordering guide, with a documented +/-10 V DC signal range. Match the receiving instrument and application scaling to this exact range. Preserve both channel assignments, then measure commanded values before restoring the process connection. STOCKAvailable WARRANTY1 Year Warranty DISPATCH2 days ORIGINUSA Configuration note: Model-identification graphic is not a product photograph. Request current supplied-unit photos and a readable IC630MDL367 nameplate before ordering. REQUEST A QUOTECHECK AVAILABILITY OFFICIAL SOURCE BASIS: GE Fanuc Product and Publications Ordering Guide GEP-791C body:has(#hero-IC630MDL367) .prom-right>.pro-table{display:none!important;border-top:0!important;margin-top:0!important;padding-top:0!important}body:has(#hero-IC630MDL367) .slider.autoplay4 .text{display:none!important}body:has(#hero-IC630MDL367) .prom-right>h1{font-family:Arial,'Segoe UI',Helvetica,sans-serif;color:#092f50;font-size:33px;line-height:1.14;font-weight:700;letter-spacing:-.55px;margin-bottom:15px}@media(min-width:768px){body:has(#hero-IC630MDL367) .page-right{display:grid!important;grid-template-columns:minmax(0,1fr) minmax(0,1fr);align-items:stretch}body:has(#hero-IC630MDL367) .page-right>.prom_img{grid-column:1;grid-row:1;float:none!important;width:auto!important;max-width:none!important;display:flex!important;flex-direction:column!important;box-sizing:border-box}body:has(#hero-IC630MDL367) .page-right>.prom-right{grid-column:2;grid-row:1;float:none!important;width:auto!important;max-width:none!important;box-sizing:border-box;margin-bottom:0!important}body:has(#hero-IC630MDL367) .prom_img:after{content:"OFFICIAL CONFIGURATION · IC630MDL367 · 2-CHANNEL BIPOLAR ANALOG OUTPUT MODULE";display:block;margin-top:auto;margin-bottom:40px;padding:15px 17px;border-radius:6px;background:linear-gradient(135deg,#0a3658,#0b6e91);color:#fff;font-family:Arial,'Segoe UI',Helvetica,sans-serif;font-size:11px;line-height:1.65;font-weight:700;letter-spacing:.035em;text-align:center;box-shadow:0 8px 22px rgba(9,47,80,.14)}body:has(#hero-IC630MDL367) .page-right>:nt...
Anfrage jetzt
IC630MDL366 GE Fanuc 2-Channel Analog Output Module
IC630MDL366 | GE Fanuc 2-Channel Analog Output Module
In stock ‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌ OFFICIAL PRODUCT · GE FANUC IC630MDL366 is a GE Fanuc Series Three 2-Channel Analog Output Module. The manufacturer bulletin documents 1 to 5 V and 4 to 20 mA outputs, with a 400-ohm maximum current-mode load. Preserve channel scaling and loop wiring, then validate both outputs against calibrated receiving equipment. STOCKAvailable WARRANTY1 Year Warranty DISPATCH2 days ORIGINUSA Configuration note: Model-identification graphic is not a product photograph. Request current supplied-unit photos and a readable IC630MDL366 nameplate before ordering. REQUEST A QUOTECHECK AVAILABILITY OFFICIAL SOURCE BASIS: GE Series Three Supplement GEK-90819, Bulletin 4A-008 body:has(#hero-IC630MDL366) .prom-right>.pro-table{display:none!important;border-top:0!important;margin-top:0!important;padding-top:0!important}body:has(#hero-IC630MDL366) .slider.autoplay4 .text{display:none!important}body:has(#hero-IC630MDL366) .prom-right>h1{font-family:Arial,'Segoe UI',Helvetica,sans-serif;color:#092f50;font-size:33px;line-height:1.14;font-weight:700;letter-spacing:-.55px;margin-bottom:15px}@media(min-width:768px){body:has(#hero-IC630MDL366) .page-right{display:grid!important;grid-template-columns:minmax(0,1fr) minmax(0,1fr);align-items:stretch}body:has(#hero-IC630MDL366) .page-right>.prom_img{grid-column:1;grid-row:1;float:none!important;width:auto!important;max-width:none!important;display:flex!important;flex-direction:column!important;box-sizing:border-box}body:has(#hero-IC630MDL366) .page-right>.prom-right{grid-column:2;grid-row:1;float:none!important;width:auto!important;max-width:none!important;box-sizing:border-box;margin-bottom:0!important}body:has(#hero-IC630MDL366) .prom_img:after{content:"OFFICIAL CONFIGURATION · IC630MDL366 · 2-CHANNEL ANALOG OUTPUT MODULE";display:block;margin-top:auto;margin-bottom:40px;padding:15px 17px;border-radius:6px;background:linear-gradient(135deg,#0a3658,#0b6e91);color:#fff;font-family:Arial,'Segoe UI',Helvetica,sans-serif;font-size:11px;line-height:1.65;font-weight:700;letter-spacing:.035em;text-align:center;box-shadow:0 8px 22px rgba(9,47,80,.14)}body:has(#hero-IC630MDL366) .page-right>:nth-child(3),body:has(#hero-IC630MDL366) .page-ri...
Anfrage jetzt
IC630MDL357 GE Fanuc 16-Point 24 V DC Source Output Module
IC630MDL357 | GE Fanuc 16-Point 24 V DC Source Output Module
In stock ‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌ OFFICIAL PRODUCT · GE FANUC IC630MDL357 is the sixteen-point 24 V DC source-output module listed for the GE Series Three platform. The sourcing direction must match the installed load return and cannot be inferred from a nearby sinking-output catalog number. Record wiring and load requirements, then verify each controlled circuit before service. STOCKAvailable WARRANTY1 Year Warranty DISPATCH2 days ORIGINUSA Configuration note: Model-identification graphic is not a product photograph. Request current supplied-unit photos and a readable IC630MDL357 nameplate before ordering. REQUEST A QUOTECHECK AVAILABILITY OFFICIAL SOURCE BASIS: GE Fanuc Product and Publications Ordering Guide GEP-791C body:has(#hero-IC630MDL357) .prom-right>.pro-table{display:none!important;border-top:0!important;margin-top:0!important;padding-top:0!important}body:has(#hero-IC630MDL357) .slider.autoplay4 .text{display:none!important}body:has(#hero-IC630MDL357) .prom-right>h1{font-family:Arial,'Segoe UI',Helvetica,sans-serif;color:#092f50;font-size:33px;line-height:1.14;font-weight:700;letter-spacing:-.55px;margin-bottom:15px}@media(min-width:768px){body:has(#hero-IC630MDL357) .page-right{display:grid!important;grid-template-columns:minmax(0,1fr) minmax(0,1fr);align-items:stretch}body:has(#hero-IC630MDL357) .page-right>.prom_img{grid-column:1;grid-row:1;float:none!important;width:auto!important;max-width:none!important;display:flex!important;flex-direction:column!important;box-sizing:border-box}body:has(#hero-IC630MDL357) .page-right>.prom-right{grid-column:2;grid-row:1;float:none!important;width:auto!important;max-width:none!important;box-sizing:border-box;margin-bottom:0!important}body:has(#hero-IC630MDL357) .prom_img:after{content:"OFFICIAL CONFIGURATION · IC630MDL357 · 16-POINT 24 V DC SOURCE OUTPUT MODULE";display:block;margin-top:auto;margin-bottom:40px;padding:15px 17px;border-radius:6px;background:linear-gradient(135deg,#0a3658,#0b6e91);color:#fff;font-family:Arial,'Segoe UI',Helvetica,sans-serif;font-size:11px;line-height:1.65;font-weight:700;letter-spacing:.035em;text-align:center;box-shadow:0 8px 22px rgba(9,47,80,.14)}body:has(#hero-IC630MDL357) .page-right>:nth-child...
Anfrage jetzt
IC630MDL356 GE Fanuc 32-Point 24 V DC Sink Output Module
IC630MDL356 | GE Fanuc 32-Point 24 V DC Sink Output Module
In stock ‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌‌ OFFICIAL PRODUCT · GE FANUC IC630MDL356 is identified in the GE ordering guide as a thirty-two-point 24 V DC sink-output module with a D connector and LED indication. Its field interface must be checked independently from terminal-wired variants. Preserve the connector pin map and load references, then verify polarity and each commanded output. STOCKAvailable WARRANTY1 Year Warranty DISPATCH2 days ORIGINUSA Configuration note: Model-identification graphic is not a product photograph. Request current supplied-unit photos and a readable IC630MDL356 nameplate before ordering. REQUEST A QUOTECHECK AVAILABILITY OFFICIAL SOURCE BASIS: GE Fanuc Product and Publications Ordering Guide GEP-791C body:has(#hero-IC630MDL356) .prom-right>.pro-table{display:none!important;border-top:0!important;margin-top:0!important;padding-top:0!important}body:has(#hero-IC630MDL356) .slider.autoplay4 .text{display:none!important}body:has(#hero-IC630MDL356) .prom-right>h1{font-family:Arial,'Segoe UI',Helvetica,sans-serif;color:#092f50;font-size:33px;line-height:1.14;font-weight:700;letter-spacing:-.55px;margin-bottom:15px}@media(min-width:768px){body:has(#hero-IC630MDL356) .page-right{display:grid!important;grid-template-columns:minmax(0,1fr) minmax(0,1fr);align-items:stretch}body:has(#hero-IC630MDL356) .page-right>.prom_img{grid-column:1;grid-row:1;float:none!important;width:auto!important;max-width:none!important;display:flex!important;flex-direction:column!important;box-sizing:border-box}body:has(#hero-IC630MDL356) .page-right>.prom-right{grid-column:2;grid-row:1;float:none!important;width:auto!important;max-width:none!important;box-sizing:border-box;margin-bottom:0!important}body:has(#hero-IC630MDL356) .prom_img:after{content:"OFFICIAL CONFIGURATION · IC630MDL356 · 32-POINT 24 V DC SINK OUTPUT MODULE";display:block;margin-top:auto;margin-bottom:40px;padding:15px 17px;border-radius:6px;background:linear-gradient(135deg,#0a3658,#0b6e91);color:#fff;font-family:Arial,'Segoe UI',Helvetica,sans-serif;font-size:11px;line-height:1.65;font-weight:700;letter-spacing:.035em;text-align:center;box-shadow:0 8px 22px rgba(9,47,80,.14)}body:has(#hero-IC630MDL356) .page-right>:nth-child(3)...
Anfrage jetzt
Lass uns zusammenarbeiten
stecken in einer kritischen Situation? moore automation bietet seinen Kunden weltweit eine Vielzahl von Dienstleistungen an. Kontaktieren Sie uns noch heute, um herauszufinden, wie Unser erfahrenes Team kann Ihnen helfen, Ausfallzeiten zu minimieren.
kontaktiere uns

Heim

Produkte

whatsapp